PRI LOGO

Product Group Pages Test Methods & Properties Raw Materials
  • Abrasion Resistance |  ASTM D 4886; Test Method for Abrasion Resistance of Geotextiles (Sand paper / Sliding Block Method)
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Accelerated Weathering |  ASTM D 4798; Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
    Asphalt Binders: Conventional Properties
  • Accelerated Weathering |  ASTM D 4799; Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray and Condensation Method)
    Asphalt Binders: Conventional Properties
  • Accelerated Weathering |  ASTM D 5329, Section 15; Pertaining to Accelerated Weathering
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Accelerated Weathering |  ASTM G 151; Pertaining to Accelerated Weathering; Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Accelerated Weathering |  ASTM G 153; Pertaining to Accelerated Weathering; Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Accelerated Weathering |  ASTM G 154; Pertaining to Accelerated Weathering; Practice for Operating Fluorescent Light Apparatus for UV Exposure on Nonmetallic Materials
    Striping Paints (Traffic Marking)
  • Accelerated Weathering |  ASTM G 154; Pertaining to Accelerated Weathering; Practice for Operating Fluorescent Light Apparatus for UV Exposure on Nonmetallic Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Accelerated Weathering |  ASTM G 155; Pertaining to Accelerated Weathering; Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Accelerated Weathering |  ASTM G 23; Pertaining to Accelerated Weathering; Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Accelerated Weathering |  PRI; Accelerated Weathering by APWS, A unique weathering system that allows for aging of complete pavement specimens.
    Pavement Performance Property Tests and Evaluations
  • Accelerated Weathering |  PRI TM-039; Accelerated Weathering Test Conditions and Procedures for Pavement Material
    Pavement Performance Property Tests and Evaluations
  • Accelerated Weathering /Aging |  AASHTO R 28; Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    Asphalt Binders: Modified & Special
  • Accelerated Weathering /Aging |  AASHTO R 28; Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Accelerated Weathering /Aging |  ASTM D 6521; Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    Asphalt Binders: Modified & Special
  • Accelerated Weathering /Aging |  ASTM D 6521; Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Accelerated Weathering – Pressure Aging Method |  AASHTO R 28; Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Accelerated Weathering – Pressure Aging Method |  ASTM D 6521; Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Accelerated Weathering – UV / Condensate) |  ASTM D 4799; Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray and Condensation Method)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Accelerated Weathering – Xenon Arc |  ASTM D 4798; Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc ethod)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Acetone Extract |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 14.1
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Acid / Base # |  ASTM D 664; Acid Number of Petroleum Products by Potentionmetric Titration
    Asphalts: Chemical Analysis
  • Acid / Base # |  ASTM D 664; Acid Number of Petroleum Products by Potentionmetric Titration
    Asphalts: Environmental Analysis
  • Acid or Base Modification |  CO DOT CP L 2214; Test Method for Determining Acid or base Modification
    Asphalt Binders: Modified & Special
  • Acidity / Alkalinity |  CO DOT
    Asphalts: Chemical Analysis
  • Acidity / Alkalinity |  ODOT (Draft)
    Asphalts: Chemical Analysis
  • Adherent Coating |  ASTM D 5711; Test Method for Determining the Adherent Coating on Coarse Aggregates
    Aggregates and Soils
  • Adhesion (Sand Retention) |  FAA EB 46A; Determination of Adhesion and Sand retention by Pressure Sensitive Tape
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Adhesion to Damp, Wet, or Underwater Surfaces |  ASTM D 6511, Section 17; Test Method for Solvent Bearing Bituminous Compounds, Wet Surface Adhesion
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Aggregate (sand) Content in Bituminous Emulsions |  ASTM D 2939, Section 28; Aggregate (Sand) Content in Bituminous Emulsions
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Aggregate (sand) Content in Bituminous Emulsions |  ASTM D 2939, Section 28; Aggregate (Sand) Content in Bituminous Emulsions
    Rejuvenators and Sealers  | Liquid Sealers
  • Aggregate Adsorption |  ISSA TB 145; Test Method for Determination on Methylene Blue Adsorption Value (MBV) of Mineral Aggregate Fillers and Fines
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Aggregate Gradation - Mixture |  AASHTO T 30; Mechanical Analysis of Extracted Aggregate
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Aggregate Properties (SE, Soundness LA Abrasion) |  ISSA A-143; ASTM C 88, C 131, D 2419 - See Aggregate Section
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Aging |  ASTM D 573; Test Method for Rubber - Deterioration in an Air Oven
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • Aging (also see Deterioration below) |  ASTM D 5721; Test Method for Air-Oven Aging of Polyolefin Geomembranes
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Air Blowing (Oxidation) |  PRI Air Blowing; PRI provides complete laboratory scale air blowing (oxidation), ith stills from 1-10 gals in capacity. Process variables cover a wide range: temperature and air rate controls, inert blanketing, mass losses and condensate recovery. The products from air blowing may be evaluated or used as a raw material in to evaluate blending, polymer modification or value added processing. PRI's laboratory oxidations compare very favorable with full sized still results.
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Air Blowing (Oxidation) – Laboratory |  Laboratory Air Blowing ; batch process parameters: capacity = 1 – 10 gals; air rate = variable; temperature = 250-550°F; condensate recovery option = Yes; inert purging = Yes; See Air Blowing Section
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Air Void Determination |  AASHTO T 269; Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Air Void Determination |  ASTM D 3203; Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Air Voids - Hot Mix / Paving Mixtures |  ASTM D 3203; Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Air Voids - Mixture |  ASTM D 3203; Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Aluminum Content |  ASTM D 6511, Section 14; Test Method for Solvent Bearing Bituminous Compounds, Aluminum Content
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Aniline Point |  ASTM D 611; Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
    Crude Oil Analysis & Evaluations
  • Anti-Stripping Additive in Asphalt |  ID DOT IT-99; Detection of Anti-Stripping Additive in Asphalt
    Asphalts: Chemical Analysis
  • Anti-Stripping Additive in Asphalt |  State DOTs IT-99-08; Idaho Standard Method of Test for Detection of Anti-Stripping Additive in Asphalt
    Asphalts: Chemical Analysis
  • API Gravity |  ASTM D 1250; Guide for Use of Petroleum Measurements Tables
    Crude Oil Analysis & Evaluations
  • API Gravity |  ASTM D 287; API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
    Crude Oil Analysis & Evaluations
  • Application Behavior – Brush |  ASTM D 2939, Section 17; Brush-Application Behavior
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Application Behavior – Brush |  ASTM D 2939, Section 17; Brush-Application Behavior
    Rejuvenators and Sealers  | Liquid Sealers
  • Application Behavior – Spray |  ASTM D 2939, Section 18; Spray-Application Behavior
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Application Behavior – Spray |  ASTM D 2939, Section 18; Spray-Application Behavior
    Rejuvenators and Sealers  | Liquid Sealers
  • Aromatic / Aliphatic Ratio |  ASTM D 6805; Test Method for Infrared (IR) Procedure for Determination of Aromatic / Aliphatic Ration of Bituminous Emulsions
    Rejuvenators and Sealers  | Liquid Sealers
  • Ash Content |  AASHTO T 111; Inorganic Matter of Ash in Bituminous Materials
    Asphalt Binders: Conventional Properties
  • Ash Content |  ASTM D 128; Test Method for Analysis of Lubricating Grease
    Coal Tar Pitch
  • Ash Content |  ASTM D 2939, Section 10; Ash Content
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Ash Content |  ASTM D 2939, Section 10; Ash Content
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Ash Content |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 14-51
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Ash Content |  ASTM D 482; Ash from Petroleum Products
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Ash Content |  ASTM D 6511, Section 9; Test Method for Solvent Bearing Bituminous Compounds, Ash Content
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Ash, % |  ASTM D 482; Ash from Petroleum Products
    Crude Oil Analysis & Evaluations
  • Asphalt (Resid/VTB) from Crude via Distillation |  ASTM D 5236; Distillation of Heavy Hydrocarbon Mixture (Vacuum Potstill Method)
    Crude Oil Analysis & Evaluations
  • Asphalt / Bitumen Content |  ASTM D 4; Test Method for Bitumen Content
    Asphalt Binders: Conventional Properties
  • Asphalt Cement Content (from pavement mixtures) |  AASHTO T 308; Asphalt Content of Hot Mix Asphalt by Ignition Oven
    Asphalt Binders: Conventional Properties
  • Asphalt Cement Content (from pavement mixtures) |  ASTM D 6307; Asphalt Content of Hot Mix Asphalt by Ignition Oven
    Asphalt Binders: Conventional Properties
  • Asphalt Compatibility* |  ASTM D 5329, Section 14; Asphalt Compatibility
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Asphalt Composition (SARA Analysis with Iatroscan) |  ASTM D 4124; Separation of Asphalt into Four Fractions (asphaltenes, saturates, naphthene aromatics, and polar aromatics)
    Asphalt Binders: Conventional Properties
  • Asphalt Content (Extraction & Recovery) |  ASTM D 6847; Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
    Pavement Performance Property Tests and Evaluations
  • Asphalt Content (Extraction of GTR Modified Binders) |  CA DOT
    Pavement Performance Property Tests and Evaluations
  • Asphalt Content (Extraction) |  AASHTO T 164; Quantitative Extraction of Asphalt Binder from Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Asphalt Content (Extraction) |  ASTM D 2172; Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
    Pavement Performance Property Tests and Evaluations
  • Asphalt Content (Extraction) |  CA DOT T 362; Method of Determining Asphalt Content of Bituminous Mixtures by Vacuum Extraction
    Asphalt Binders: Ground Tire Rubber Modified
  • Asphalt Content (Ignition Oven) |  AASHTO T 308; Asphalt Content of Hot Mix Asphalt by Ignition Oven
    Pavement Performance Property Tests and Evaluations
  • Asphalt Content (Ignition Oven) |  ASTM D 6307; Asphalt Content of Hot Mix Asphalt by Ignition Oven
    Pavement Performance Property Tests and Evaluations
  • Asphalt Content - Mixtures |  ASTM D 2172; Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
    Mix Designs  | Cold Mixes
  • Asphalt Content - Mixtures |  ASTM D 545, Section 7.5; Asphalt Content; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Asphalt Pavement Analyzer (APA) Rut Test |  AASHTO TP 63; Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)
    Pavement Performance Property Tests and Evaluations
  • Asphalt Recovery, Abson Method |  AASHTO T 170; Recovery of Asphalt from Solution by Abson Recovery
    Asphalt Binders: Conventional Properties
  • Asphalt Recovery, Abson Method |  ASTM D 1856; Recovery of Asphalt from Solution by Abson Recovery
    Asphalt Binders: Conventional Properties
  • Asphalt Recovery, Rotovap |  ASTM D 5404; Recovery of Asphalt from Solution Using the Rotavapor Evaporator
    Asphalt Binders: Conventional Properties
  • Asphalt Retention |  ASTM D 6140; Test Method for Determining the Asphalt Retention of Paving Fabrics
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Asphaltenes, % |  KS DOT 1007; Pentane Insolubles
    Asphalts: Chemical Analysis
  • Asphaltenes, (Heptane & Pentane Precipitation) |  UOP 614 (Heptane)/ 99 (Pentane); TM for Insoluble Matter in Oils
    Asphalts: Chemical Analysis
  • Asphaltenes,% |  ASTM D 3279; n-Heptane Insolubles (also other solvents)
    Asphalts: Chemical Analysis
  • Auto Ignition |  ASTM E 659; Auto-Ignition Temperature of Liquid Chemicals
    Asphalts: Chemical Analysis
  • Base / Neutrals / Acids |  EPA 1311/8270; Test Method for Determining TCLP Bases, Neutrals, and Acids
    Asphalts: Environmental Analysis
  • Bases, Neutrals & Acids |  EPA 1311/8260; Test Method for Determining TCLP Volatiles
    Asphalts: Chemical Analysis
  • Beam Fatigue |  AASHTO TP 9; Standard Test Method for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device
    Pavement Performance Property Tests and Evaluations
  • Behavior at 60°C (140°F) |  ASTM D 6511, Section 12; Test Method for Solvent Bearing Bituminous Compounds, Behavior at 60°C (140°F)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Binder Content - Mixture |  ASTM D 2172; Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Binder Content - Mixture |  ASTM D 6307; Asphalt Content of Hot Mix Asphalt by Ignition Oven
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Bitumen Content |  ASTM D 4; Test Method for Bitumen Content
    Coal Tar Pitch
  • Bitumen Content |  ASTM D 4; Test Method for Bitumen Content
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Bitumen Content |  ASTM D 4; Test Method for Bitumen Content
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Bitumen Content |  ASTM D 4; Test Method for Bitumen Content
    Rejuvenators and Sealers  | Liquid Sealers
  • Boiling in Hydrochloric Acid |  ASTM D 545, Section 7.4; Boiling in Hydrochloric Acid; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Bond Pull-Off Strength |  WS DOT T 426; Pull-Off Test for Hot Melt Traffic Button Adhesive
    Flexible Pavement Marker Adhesive
  • Bond Shear Strength |  FL DOT; Draft Procedure Modified for Fabrics and/or Interlayer Systems
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Bond Strength |  AASHTO T 250; Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
    Striping Paints (Traffic Marking)
  • Bond Strength |  ASTM D 4796; Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
    Striping Paints (Traffic Marking)
  • Bond, Fuel-Immersed* |  ASTM D 5329, Section 11; Bond Fuel-Immersed
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Bond, Non-Immersed* |  ASTM D 5329, Section 9; Bond Non-Immersed
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Breaking Strength & Elongation |  ASTM D 4632; Test Method for Grab Breaking Load and Elongation of Geotextiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Bulk Density, Kerosene |  BS 812; Test Method of Determining Density
    Aggregates and Soils
  • Bulk Gravity - Mixture |  ASTM D 2726; Test Method for Bulk Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Bulk Specific Gravity |  AASHTO T 166; Test Method for Bulk Specific Gravity of Non-Absorptive Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens
    Pavement Performance Property Tests and Evaluations
  • Bulk Specific Gravity |  AASHTO T 331; Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
    Pavement Performance Property Tests and Evaluations
  • Bulk Specific Gravity |  ASTM D 2726; Bulk Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens
    Pavement Performance Property Tests and Evaluations
  • Bulk Specific Gravity |  ASTM D 6752; Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
    Pavement Performance Property Tests and Evaluations
  • Carbon Black Content |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 38-39
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Carbon Black Dispersion |  ASTM D 5596; Test Method for Microscopic Evaluation of Dispersion of Carbon Black in Polyolefin Geosynthetics
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Carbon, Hydrogen, Nitrogen & Oxygen Content |  ASTM D 5291; Instrumental Determination of C, H, N & O in Petroleum Products & Lubricants
    Crude Oil Analysis & Evaluations
  • Carbonyl Index |  ASTM E 1252; General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
    Asphalts: Chemical Analysis
  • Cement Mixing |  AASHTO T 59, Section 12; Determining Cement Mixing of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Cement Mixing |  ASTM D 6935; Determining Cement Mixing of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Characterization |  ASTM D 2007; Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum Derived Oils by Clay-Gel Absorption Chromatographic Method
    Recycling Agents and Additives
  • Chemical Resistance - Geogrids |  ASTM D 6213; Practice for Tests to Evaluate Chemical Resistance of Geogrids to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chemical Resistance - Geomembranes |  ASTM D 5747; Practice for Tests to Evaluate Chemical Resistance of Geomembranes to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chemical Resistance - Geonets |  ASTM D 6388; Practice for Tests to Evaluate Chemical Resistance of Geonets to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chemical Resistance - Geotextiles |  ASTM D 6389; Practice for Tests to Evaluate Chemical Resistance of Geotextiles to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chloride Content |  ASTM D 4294 (Modified)
    Asphalts: Chemical Analysis
  • Chloride Ion Penetration Resistance |  AASHTO T 259; Method of Test for Resistance of Concrete to Chloride Ion Penetration
    Concrete
  • Chloride Ion Penetration Resistance |  AASHTO T 277; Method of Test for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
    Concrete
  • Chloride Ion Penetration Resistance |  ASTM C 1202; Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
    Concrete
  • Chlorides (Organic) |  ASTM D 4929; Determination of Organic Chloride Content in Crude Oil
    Crude Oil Analysis & Evaluations
  • Classification Compatibility (Schultze-Breurer & Ruck) |  ISSA TB 144; Test Method for Classification of Aggregate Filler - Bitumen Compatibility by Schultze-Breurer & Ruck Procedures
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Clay Content |  AASHTO T 176; Plastic Fines in Graded Aggregates and Soils by Use of Sand Equivalent Test
    Aggregates and Soils
  • Clay Lumps & Friable particles |  AASHTO T 112; Clay Lumps and Friable Particles in Aggregates
    Aggregates and Soils
  • Clay Lumps & Friable particles |  ASTM C 142; Test Method for Clay Lumps and Friable Particles in Aggregates
    Aggregates and Soils
  • Coarse Aggregate Angularity |  PA DOT 621; Determination of the Percentage of Fractured particles in Coarse Aggregate
    Aggregates and Soils
  • Coating & Stripping - Mixture |  ASTM D 1664; Coating and Stripping of Bitumen - Aggregate Mixtures
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Coating & Water Resistance |  AASHTO T 59, Section 22; Ash Content
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Coating & Water Resistance |  ASTM D 244, Section 22-29; Coating Ability and Water Resistance
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Cohesion (30 & 60 minute) |  ISSA TB 139; Test Method to Classify Emulsified Asphalt / Aggregate Mixture Systems by Modified Cohesive Tester, Measurement of Set and Cure Characteristics
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Color |  AASHTO T 250, Section 7; Reflectance, Color and Yellowness Index
    Striping Paints (Traffic Marking)
  • Color |  ASTM D 4960; Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
    Striping Paints (Traffic Marking)
  • Compatibility |  ASTM D 5976; Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction
    Asphalt Binders: Modified & Special
  • Compatibility |  ASTM D 5976; Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Compatibility |  ISSA TB 149; Test Method for Boiling Compatibility of Slurry Seal Mixes
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Compatibility - Arkansas |  State DOTs QPL 410.06; Release Agents for Use in Dump Beds hauling Hot Mix Asphalt
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Illinois |  State DOTs; Evaluation of Asphalt Release Agents, Procedure para B.
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Indiana |  State DOTs ITM No. 576-01T; Laboratory Evaluation of Anti-Adhesive Agents, para 6.1 Film Test
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Kansas |  State DOTs KTMR-19, Section Subsection 1719; Release Compound for Bituminous Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Louisiana |  State DOTs Asphalt release Agents, Section 2-3; Rub & Retained Marshall Stability
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Mississippi |  State DOTs Release Agents; One-Day Compatibility
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Missouri |  Mo DOT T 63; Determination of Compatibility of Asphalt Release Agents with Hot Asphaltic Concrete
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Ohio |  State DOTs; Detrimental Effects as Defined in Laboratory Test Procedure for Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Oklahoma |  State DOTs 441.03; Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Tennessee |  State DOTs QPL 21; Release Compounds for Asphalt Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Texas |  TX DOT Tex-239-F; Asphalt Release Agent, Chapter 35
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Virginia |  VA DOT TM 53; Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Composition (Design Method) - Marshall Method |  AI MS-2; Preparation of Bituminous Specimens by Marshall Apparatus
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Composition (Design Method) - Superpave TM |  AI SP-2; Superpave Mix Design, Level I
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Compression |  ASTM D 575; Test Method for Rubber Properties in Compression
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • Compression, |  ASTM D 545, Section 7.2; Recovery; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Compressive Strength |  AASHTO T 167; Compressive Strength of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Compressive Strength |  ASTM D 1074; Test Method of Compressive Strength of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Compressive Strength – Effects of Water |  AASHTO T 165; Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Compressive Strength – Effects of Water |  ASTM D 1075; Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Cone Penetration, Fuel-Immersed* |  ASTM D 217; Test Method for Cone Penetration of Lubricating Greases
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Cone Penetration, Fuel-Immersed* |  ASTM D 5329, Section 7; Test Method for Cone Penetration of Lubricating Greases, Fuel-Immersed
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Cone Penetration, Non-Immersed* |  ASTM D 217; Test Method for Cone Penetration of Lubricating Greases
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Cone Penetration, Non-Immersed* |  ASTM D 5329, Section 6; Test Method for Cone Penetration of Lubricating Greases, Non-Immersed
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Conradson Carbon Residue (Coking Value) |  ASTM D 189; Conradson Carbon Residue of Petroleum Products
    Crude Oil Analysis & Evaluations
  • Consistency |  ASTM D 562; Consistency of Paints Measuring Krebs Units Viscosity Using a Stormer-Type Viscometer
    Striping Paints (Traffic Marking)
  • Consistency |  ASTM D 6511, Section 11; Test Method for Solvent Bearing Bituminous Compounds, Consistency (ASTM D 562)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Consistency |  ISSA TB 106; Slurry Seal Consistency
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Consistency (Saybolt Furol) |  AASHTO T 59, Section 17; AASHTO T 72; Saybolt Viscosity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Consistency (Saybolt Furol) |  ASTM D 244, Section 17-21; ASTM D 88; Saybolt Viscosity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Constant Weight |  ASTM D 1037; Test Method for Evaluating the Properties of Wood-Based Fiber and Particle Panel Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Contaminate Fractions |  ASTM D 7213; Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615 °C by Gas Chromatography
    Asphalts: Chemical Analysis
  • Corrosion Evaluation |  ASTM D 1654; Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    Striping Paints (Traffic Marking)
  • Corrosion Resistance |  ASTM D 5968; Evaluation of Corrosiveness of Diesel Engine Oil
    Asphalt Binders: Conventional Properties
  • Corrosion Resistance (Copper) |  ASTM D 4048; Detection of Copper Corrosion from Lubricating Greases
    Asphalt Binders: Conventional Properties
  • Corrosion Resistance (Copper) |  ASTM D 4048; Detection of Copper Corrosion from Lubricating Greases
    Asphalts: Chemical Analysis
  • Crack Resistance |  ASTM D 5397; Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Cracking Resistance |  AASHTO M 248; Test Method for Cracking Resistance (on concrete block), para 4.3.3
    Striping Paints (Traffic Marking)
  • Cracking Resistance |  ISSA TB 146; Test Method for Flexural Tension Determination of Cracking Resistance of Slurry Mixes at Ambient and 4°C
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Creep Compliance |  AASHTO T 322; Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
    Pavement Performance Property Tests and Evaluations
  • Creep Stiffness |  AASHTO T 313; Determining the Flexural Creep Stiffness of Asphalt Binders Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Ground Tire Rubber Modified
  • Creep Stiffness |  AASHTO T 313; Determining the Flexural Creep Stiffness of Asphalt Binders Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Modified & Special
  • Creep Stiffness |  AASHTO T 313; Determining the Flexural Creep Stiffness of Asphalt Binders Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Creep Stiffness |  ASTM D 6648; Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Ground Tire Rubber Modified
  • Creep Stiffness |  ASTM D 6648; Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Modified & Special
  • Creep Stiffness |  ASTM D 6648; Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Critical Cracking Temperature |  ASTM D 6816; Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
    Asphalt Binders: Modified & Special
  • Crude Blending (Volume Method) |  PRI
    Crude Oil Analysis & Evaluations
  • Crude Oil Compatibility |  ASTM D 6703M; Test Method for Automated Heithaus Titrimetry
    Crude Oil Analysis & Evaluations
  • Crush Resistance |  ASTM D 1213; Test Method for Crushing Resistance
    Striping Paints (Traffic Marking)
  • Degradation (LA Abrasion)Aggregates  |  ASTM C 131; Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Degradation (LA Abrasion)Aggregates  |  ASTM C 131; Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
    Mix Designs  | Hot Mix Asphalt Designs
  • Demulsibility |  AASHTO T 59, Section 10; Determining Demulsibility of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Demulsibility |  ASTM D 6936; Determining Demulsibility of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Density |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Recycling Agents and Additives
  • Density |  AASHTO T 250, Section 13; Test Method for Density and SG (Relative Density) of Plastics by Displacement
    Striping Paints (Traffic Marking)
  • Density |  ASTM D 1475; Test Method for Density of Paint, Varnish, Lacquer and Related Products
    Striping Paints (Traffic Marking)
  • Density |  ASTM D 545, Section 7.7; Density; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Density |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Recycling Agents and Additives
  • Density |  ASTM D 792; Test Method for Density and Specific Gravity (Relative Density) of Plastics by Displacement
    Striping Paints (Traffic Marking)
  • Density / Unit Weight |  ASTM D 6937; Determining Density of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Density / Unit Weight |  ASTM D 6937; Determining Density of Emulsified Asphalts
    Rejuvenators and Sealers  | Liquid Sealers
  • Density, Absorption and Voids |  ASTM C 642; Test Method for Density, Absorption, and Voids in Hardened Concrete
    Concrete
  • Density, Relative (SG) or API |  AASHTO T 227; Test Method for Density, Relative Density (SG) or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    Recycling Agents and Additives
  • Density, Relative (SG) or API |  ASTM D 1298; Test Method for Density, Relative Density (Specific Gravity) or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
    Recycling Agents and Additives
  • Deterioration |  ASTM D 5970; Test Method for Deterioration of Geotextiles from Outdoor Exposure
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Deterioration (Aging) |  ASTM D 4355; Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon- Arc Type Apparatus)
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Direct Flame Test |  ASTM D 2939, Section 20; Direct Flame Test
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Direct Flame Test |  ASTM D 2939, Section 20; Direct Flame Test
    Rejuvenators and Sealers  | Liquid Sealers
  • Direct Tension |  AASHTO T 314; Determining Fracture Properties of Asphalt Binders in Direct Tension (DTT)
    Asphalt Binders: Modified & Special
  • Direct Tension |  AASHTO T 314; Determining Fracture Properties of Asphalt Binders in Direct Tension (DTT)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Direct Tension |  ASTM D 6723; Determining Fracture Properties of Asphalt Binder in Direct Tension (DTT)
    Asphalt Binders: Modified & Special
  • Direct Tension |  ASTM D 6723; Determining Fracture Properties of Asphalt Binder in Direct Tension (DTT)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Distillation |  AASHTO T 59, Section 5; Distillation of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Distillation |  AASHTO T 78; Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
    Cutback Asphalts and Products
  • Distillation |  ASTM D 20; Distillation of Road Tars
    Coal Tar Pitch
  • Distillation |  ASTM D 2892; Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
    Crude Oil Analysis & Evaluations
  • Distillation |  ASTM D 402; Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
    Cutback Asphalts and Products
  • Distillation |  ASTM D 6997; Distillation of Emulsified Asphalt
    Recycling Agents and Additives
  • Distillation |  ASTM D 6997; Distillation of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Distillation (low temperature vacuum) |  AASHTO T 59, Section 64
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Distillation (low temperature vacuum) |  ASTM D 244, Section 64-69; Residue by Low-Temperature Vacuum Distillation
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Distillation (SimDis) |  ASTM D 5307; Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
    Crude Oil Analysis & Evaluations
  • Distillation (Steam) |  ASTM D 255; Steam Distillation of Bituminous Protective Coatings
    Asphalt Binders: Conventional Properties
  • Distillation of Petroleum Products |  ASTM D 86; Distillation of Petroleum Products at Atmospheric Pressure
    Asphalt Binders: Conventional Properties
  • Distillation of Road Tars |  ASTM D 20; Distillation of Road Tars
    Asphalt Binders: Conventional Properties
  • Draindown (SMA’s) |  ASTM D 6390; Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
    Pavement Performance Property Tests and Evaluations
  • Draindown - Hot Mix / Paving Mixtures |  ASTM D 6390; Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Drying |  ASTM D 4061; Test Method for Retroflectance of Horizontal Coating (doctor blade application)
    Coal Tar Pitch
  • Drying (Curing) |  ASTM D 1640; Test Method for Drying, Curing or Film Formation of Organic Coatings at Room Temperature
    Striping Paints (Traffic Marking)
  • Drying Time |  ASTM D 2939, Section 13; Drying Time
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Drying Time |  ASTM D 2939, Section 13; Test Method for Determining Firm Set
    Rejuvenators and Sealers  | Liquid Sealers
  • Drying Time |  ASTM D 711; Test Method for No-Pick-Up Time of Traffic Paint
    Rejuvenators and Sealers
  • Drying Time |  ASTM T 248; Test Method for Drying Time
    Striping Paints (Traffic Marking)
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalt Binders: Conventional Properties
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Cutback Asphalts and Products
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Flexible Pavement Marker Adhesive
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Ductility |  AASHTO T 51; Test Method for Ductility of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalt Binders: Conventional Properties
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Cutback Asphalts and Products
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Flexible Pavement Marker Adhesive
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Ductility |  ASTM D 113; Ductility of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Ductility |  GOST 11505; Ductility of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Ductility Ratio |  State DOTs
    Asphalt Binders: Conventional Properties
  • Ductility* |  ASTM D 113; Ductility of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Durability Index |  AASHTO T 210; Aggregate Durability Index
    Aggregates and Soils
  • Durability Index |  ASTM D 3744; Aggregate Durability Index
    Aggregates and Soils
  • Dynamic Creep |  BS DD 226
    Pavement Performance Property Tests and Evaluations
  • Dynamic Modulus |  AASHTO TP 62; Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures
    Pavement Performance Property Tests and Evaluations
  • Dynamic Modulus - Hot Mix / Paving Mixtures |  AASHTO TP 62; Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Dynamic Modulus - Hot Mix / Paving Mixtures |  ASTM D 3497; Test Method for Dynamic Modulus of Asphalt Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Dynamic Shear |  AASHTO T 315; Determining the Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Dynamic Shear |  AASHTO T 315; Determining the Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Dynamic Shear |  ASTM D 7175; Determining Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Dynamic Shear |  ASTM D 7175; Determining Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Dynamic Shear |  BS 2000-536:2005; Determination of Complex Shear Modulus and Phase Angle- Dynamic Shear Rheometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Dynamic Shear |  CA DOT Test 381; Method of Determination of Asphalt Binder Properties Using Dynamic Shear Rheometer (DSR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Dynamic Shear |  EN 14770:2005; Determination of Complex Shear Modulus and Phase Angle- Dynamic Shear Rheometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Dynamic Shear & Phase Angle |  AASHTO T 315; Determining the Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer
    Asphalt Binders: Modified & Special
  • Dynamic Shear & Phase Angle |  ASTM D 7175; Determining Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
    Asphalt Binders: Modified & Special
  • Dynamic Shear & Phase Angle |  BS 536; Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
    Asphalt Binders: Modified & Special
  • Dynamic Shear & Phase Angle |  EN 14770; Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
    Asphalt Binders: Modified & Special
  • Dynamic Shear Rheometer |  AASHTO T 315; Determining the Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer
    Asphalt Binders: Ground Tire Rubber Modified
  • Dynamic Shear Rheometer |  ASTM D 7175; Determining Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
    Asphalt Binders: Ground Tire Rubber Modified
  • EDSI (inorganics) |  ASTM E 1508; Quantitative Analysis by Energy-Dispersive Spectroscopy
    Asphalts: Chemical Analysis
  • Effect of Moisture on Paving Mixtures |  ASTM D 4867 (4867M); Test Method for Determining Effect of Moisture on Asphalt Concrete Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Effect of Water on Coated Aggregates |  ASTM D 3625; Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
    Pavement Performance Property Tests and Evaluations
  • Effective Porosity |  ASTM D 7063; Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous paving Mixtures Using Marshall Apparatus
    Pavement Performance Property Tests and Evaluations
  • Effects of Exposure (Aging) |  ASTM D 7238; Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembranes Using Fluorescent UV Condensation Apparatus
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Effects of Temperature |  ASTM D 4594; Test Method for Effects of Temperature on Stability of Geotextiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Elastic Recovery |  AASHTO T 301; Elastic Recovery of Asphalt Materials by Means of a Ductilometer
    Asphalt Binders: Ground Tire Rubber Modified
  • Elastic Recovery |  AASHTO T 301; Elastic Recovery of Asphalt Materials by Means of a Ductilometer
    Asphalt Binders: Modified & Special
  • Elastic Recovery |  AASHTO T 301; Elastic Recovery of Asphalt Materials by Means of a Ductilometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Elastic Recovery |  ASTM D 6084; Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer
    Asphalt Binders: Modified & Special
  • Elastic Recovery |  ASTM D 6084; Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Elastic Recovery (State DOT) |  State DOTs; Refer to State DOT Binder Specification, there are 11 variations of T 301 and D 6084
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Elastic Recovery (TX DOT) |  TX DOT Tex 539-C
    Asphalt Binders: Ground Tire Rubber Modified
  • Elastic Recovery – State DOT |  State DOTs; There are 11 TM variations of T 301 & D 6084; PRI performs all procedures
    Asphalt Binders: Modified & Special
  • Elemental Analysis of Lubricant and Additive Components |  ASTM D 4927M; Elemental Analysis of Lubricant and Additive Components, Barium, Calcium, Phosphorus, Sulfur and Zinc by Wavelength Dispersive X-Ray Fluorescence
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Emulsified Asphalt Properties (Residue from Distillation & Pen of Residue) |  ISSA A-143; ASTM D 244 & D 2397- See Section on Emulsified Asphalt
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Evaluation and Characterization of Additives and Modifiers |  PRI Additives and Modifiers ; PRI can evaluate, assess, and characterize additives and modifiers, expanding to the basic tenants outlined in AASHTO R 15; Practice for Asphalt Additives and Modifiers. We maintain an inventory of asphalts, binders, and aggregates to be used in the additive and modifier projects to ensure continuity. Often successful evaluation projects result in intellectual property via patents for our clients.
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Evaluation of Coal Tar Emulsion Modifiers |  PRI TM-019; Evaluation of Coal Tar Emulsion Modifiers
    Coal Tar Pitch
  • Excess Asphalt (Sand Adhesion) |  ISSA TB 109; Test Method for Measurement of Excess Asphalt in Bituminous Mixtures by use of A Loaded Wheel Tester and Sand Adhesion
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Expansion |  ASTM D 4792; Test Method for Potential Expansion of Aggregate from Hydration Reactions
    Aggregates and Soils
  • Expansion in Boiling Water |  ASTM D 545, Section 7.1; Expansion in Boiling Wate; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Extraction of Bitumen (Centrifudge) |  AASHTO T 164, Section Method A ; Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
    Asphalt Binders: Conventional Properties
  • Extraction of Bitumen (Centrifudge) |  ASTM D 2172, Section Method A; Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
    Asphalt Binders: Conventional Properties
  • Extraction of Bitumen (Reflux) |  AASHTO T 164, Section Method B; Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
    Asphalt Binders: Conventional Properties
  • Extraction of Bitumen (Reflux) |  ASTM D 2172, Section Method B; Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
    Asphalt Binders: Conventional Properties
  • Extraction of Bitumen (Vacuum) |  CALTRANS 362; Method of Determining Asphalt Content of Bituminous Mixtures by Vacuum Extraction
    Asphalt Binders: Conventional Properties
  • Extrusion |  ASTM D 545, Section 7.3; Extrusion; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • FAA |  FAA AC 150/5370-10C; Test Method for Fuel Resistance
    Rejuvenators and Sealers  | Liquid Sealers
  • Fatigue Life |  AASHTO T 321; Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
    Pavement Performance Property Tests and Evaluations
  • Fiber & Other Content |  AZ DOT TM 714
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Fiber Type Identification |  ASTM D 276; Test Method for Identification of Fibers in Textiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Field (Aggregate) Coating Test |  AASHTO T 59, Section 43-48; Field Coating Test of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Field (Aggregate) Coating Test |  ASTM D 244, Section 52-57; Field Coat Testing on Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Filtering Efficiency |  ASTM D 5141; Test Method for Determining Filtering Efficiency and Flow Rate for Silt Fence Application of a Geotextile Using Site Specific Soils
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Fine Aggregate Angularity - Aggregates |  AASHTO T 304; Test Method for Uncompacted Void Content of Fine Aggregates (Fine Aggregate Angularity)
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Fine Aggregate Angularity - Aggregates |  AASHTO TP 33; Test Method for Uncompacted Void Content of Fine Aggregate
    Aggregates and Soils
  • Flammability |  ASTM D 6668; Test Method for Discrimination Between Flammability Ratings F=0 and F=1
    Release Agents (for Truck Beds, Tools and Other)
  • Flash and Fire Points |  AASHTO T 48; Test Method for Flash and Fire Points by Cleveland Open Cup
    Striping Paints (Traffic Marking)
  • Flash Point |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Recycling Agents and Additives
  • Flash Point |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Recycling Agents and Additives
  • Flash Point |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Striping Paints (Traffic Marking)
  • Flash Point |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Crude Oil Analysis & Evaluations
  • Flash Point |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Flash Point |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Rejuvenators and Sealers  | Liquid Sealers
  • Flash Point (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Cutback Asphalts and Products
  • Flash Point (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Cutback Asphalts and Products
  • Flash Point (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Cleveland Open Cup |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Conventional Properties
  • Flash Point, Cleveland Open Cup |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Conventional Properties
  • Flash Point, Cleveland Open Cup |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Conventional Properties
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Modified & Special
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Coal Tar Pitch
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Modified & Special
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Coal Tar Pitch
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Modified & Special
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Coal Tar Pitch
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flash Point, Cleveland Open Cup (COC) |  GOST 4333; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Pensky-Martens |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Ground Tire Rubber Modified
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Conventional Properties
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Ground Tire Rubber Modified
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Modified & Special
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Tag Open Cup |  AASHTO T 79; Flash Point with Tag Open Cup Apparatus for Use with Materials Having a Flash Less Than 93.3C (Cutback)
    Asphalt Binders: Conventional Properties
  • Flash Point, Tag Open Cup |  ASTM D 3143; Flash Point of Cutback Asphalt with Tag Open Cup Apparatus
    Asphalt Binders: Conventional Properties
  • Flash Point, Tag Open Cup |  ASTM D 3143; Flash Point of Cutback Asphalt with Tag Open Cup Apparatus
    Cutback Asphalts and Products
  • Flat & Elongated Particles - Aggregates |  ASTM D 4791; Test Method for Flat Particles, Elongated Particles or Flat & Elongated particles in Coarse Aggregates
    Aggregates and Soils
  • Flat & Elongated Particles - Aggregates |  ASTM D 4791; Test Method for Flat Particles, Elongated Particles or Flat & Elongated particles in Coarse Aggregates
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Flat & Elongated Particles - Aggregates |  ASTM D 4791; Test Method for Flat Particles, Elongated Particles or Flat & Elongated particles in Coarse Aggregates
    Mix Designs  | Hot Mix Asphalt Designs
  • Flexibility |  ASTM D 2939, Section 16; Flexibility
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Flexibility |  ASTM D 2939, Section 16; Flexibility
    Rejuvenators and Sealers  | Liquid Sealers
  • Flexibility |  ASTM D 3111; Test Method for Flexibility of Hot-Melt Adhesive by Mandrel Bend Test Method
    Flexible Pavement Marker Adhesive
  • Flexibility (low temperature) |  ASTM D 3111; Test Method for Flexibility of Hot-Melt Adhesive by Mandrel Bend Test Method
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flexibility* |  ASTM D 5329, Section 18; Flexibility
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Float |  ASTM D 139; Float Test for Bituminous Materials
    Coal Tar Pitch
  • Float Test |  ASTM D 139; Float Test for Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flow* |  ASTM D 5329, Section 8; Flow
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Flowability |  AASHTO T 250, Section 9; Test Method for Flowability
    Striping Paints (Traffic Marking)
  • Fluorescence Microscopy |  PRI
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Fluorescence Microscopy |  Shell Chemical
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flux / Resid |  Laboratory distillation capability provides an array of methods to characterize crude for efficacy in roofing
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Force Ductility |  State DOTs; Refer to State DOT Binder Specification
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Force Ductility & Ratio |  AASHTO T 300; Force Ductility Test of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Force Ductility (Ratio) |  AASHTO T 300; Force Ductility Test of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Force Ratio |  AASHTO T 300; Force Ductility Test of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Fraass Breaking Point |  DIN 52012; Temperature Below Which a Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Conventional Properties
  • Fraass Breaking Point |  EN 12593; Temperature Below Which a Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Penetration and Viscosity - Graded
  • Fraass Breaking Point |  EN 12593; Temperature Below Which Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Modified & Special
  • Fraass Breaking Point |  EN 12593; Temperature Below Which Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Fraass Breaking Point |  GOST 11507; Temperature Below Which a Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Penetration and Viscosity - Graded
  • Fractured Faces - Aggregates |  ASTM D 5821; Test Method for Determining Percentage of Fractured particles in Coarse Aggregate
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Fractured Faces - Aggregates |  ASTM D 5821; Test Method for Determining Percentage of Fractured particles in Coarse Aggregate
    Mix Designs  | Hot Mix Asphalt Designs
  • Fractured Particles |  ASTM D 5821; Test Method for Determining Percentage of Fractured particles in Coarse Aggregate
    Aggregates and Soils
  • Freeze-Thaw Conditioning (Crack Resistance) |  FAA EB 46A; Determining Crack Development When Exposed to Cycles of Freezing and Thawing
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Freezing |  AASHTO T 59, Section 16; Test Method for Determining Damage from Freezing
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Fuel Resistance |  FAA EB 46A; Determining Resistance to Kerosene
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Fuel Resistance |  FAA P 631; Fuel Resistance
    Rejuvenators and Sealers
  • Gel Permeation Chromatography |  ASTM E 1252; General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
    Asphalts: Chemical Analysis
  • Gradation (AZ DOT) |  AZ DOT TM 714
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Gradation (Extracted Aggregates) |  AASHTO T 30; Mechanical Analysis of Extracted Aggregates (requires extraction by AASHTO T 164 / ASTM D 2172 Quantitative Extraction of Bitumen…)
    Pavement Performance Property Tests and Evaluations
  • Gradation (FL DOT) |  FL DOT FM 5-559, Section 4; Ground Tire Rubber
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Gradation (TX DOT) |  TX DOT Tex 200-F; Part 2
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Hamburg Loaded Wheel |  AASHTO T 324; Hamburg Wheel - Track Testing of Compacted Hot-Mix Asphalt (HMA)
    Pavement Performance Property Tests and Evaluations
  • Hamburg Loaded Wheel |  TX DOT Tex 242-F; Hamburg Wheel - Track Testing of Compacted Hot-Mix Asphalt (HMA)
    Pavement Performance Property Tests and Evaluations
  • Hardness |  ASTM D 2240; Test Method for Rubber Property - Durometer Hardness
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • Hardness |  ASTM D 3363; Test Method for Film Hardness by Pencil Test
    Striping Paints (Traffic Marking)
  • Heat Loss (Oven Loss) |  ASTM D 6; Loss on Heating of Oil and Asphaltic Compounds
    Asphalt Binders: Conventional Properties
  • Heat Loss (Oven Loss) |  ASTM D 6; Loss on Heating of Oil and Asphaltic Compounds
    Asphalt Binders: Modified & Special
  • Heat Loss (Oven Loss) |  ASTM D 6; Loss on Heating of Oil and Asphaltic Compounds
    Asphalt Binders: Penetration and Viscosity - Graded
  • Heat Loss (Oven Loss) |  ASTM D 6; Loss on Heating of Oil and Asphaltic Compounds
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Heat Loss (Oven Loss) |  ASTM D 6; Loss on Heating of Oil and Asphaltic Compounds
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Heat of Combustion / Heating Value |  ASTM D 240; Heat for Combustion of Liquid Hydrogen Fuels by Bomb Calorimeter
    Asphalts: Chemical Analysis
  • Hydraulic Conductivity |  ASTM D 5567; Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Identification of Cationic Rapid Setting Emulsions |  AASHTO T 59, Section 27-35; Identification Test for Rapid Setting Cationic Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Identification of Cationic Rapid Setting Emulsions |  ASTM D 244, Section 38-45; Identification Test for Rapid Setting Cationic Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Identification of Cationic Slow Setting Emulsions |  AASHTO T 59, Section 36-42; Identification of Cationic Slow Set Emulsions
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Identification of Cationic Slow Setting Emulsions |  ASTM D 244, Section 46-51; Identification of Cationic Slow Setting Emulsions
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Identification of TLA |  ASTM D 6608; Practice for Identification of Trinidad Lake Asphalt in Asphalt Mixes
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Impact Resistance |  AASHTO T 250, Section 11; Test Method for Impact Resistance
    Striping Paints (Traffic Marking)
  • Impact Resistance |  ASTM D 256; Test Method for Determining Izod Pendulum Impact Resistance of Notched Specimens
    Striping Paints (Traffic Marking)
  • Index Flux |  ASTM D 5587; Test method for Tearing Strength of Fabrics by the Trapezoid Procedure
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Indirect Tensile Strength |  ASTM D 6931; Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Infrared Emittance |  ASTM C 1371; Test Method for Determination of Emittance of Materials Near Room Temperature
    Green/Sustainable Products
  • Infrared Emittance |  ASTM C 1371; Test Method for Determination of Emittance of Materials Near Room Temperature
    Asphalts: Environmental Analysis  | Leed Pavement Qualification - by PRI-CMT
  • Infrared Emittance |  ASTM C 1371; Test Method for Determination of Emittance of Materials Near Room Temperature
    Pavement Performance Property Tests and Evaluations  | Leed Pavement Qualification - by PRI-CMT
  • Insolubles in Carbonate Aggregates |  ASTM D 3042; Test Method for Insoluble Residue in Carbonate Aggregates
    Aggregates and Soils
  • Kerosene Equivalent |  ASTM D 5148; Test Method for Centrifuge Kerosene Equivalent
    Aggregates and Soils
  • Lateral Displacement |  ISSA TB 147A; Test Method for Measurements of Stability and Resistance of Compaction, Vertical and Lateral Displacement of Multilayered Fine Aggregate Cold Mixes
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Lightweight Pieces in Aggregate |  AASHTO T 113; Lightweight Pieces in Aggregate
    Aggregates and Soils
  • Lightweight Pieces in Aggregate |  ASTM C 123; Test Method for Lightweight Particles in Aggregate
    Aggregates and Soils
  • Lime |  AASHTO T 219; Testing Lime for Chemical Constituents and Particle Size
    Aggregates and Soils
  • Lime |  AASHTO T 232; Determination of Lime Content in Lime-Treated Soils by Titration
    Aggregates and Soils
  • Liquid & Plastic Limits (PI) - Aggregates |  ASTM D 4318; Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils
    Mix Designs  | Cold Mixes
  • Liquid & Plastic Limits (PI) - Aggregates |  ASTM D 4318; Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Liquid & Plastic Limits (PI) - Aggregates |  ASTM D 4318; Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils
    Mix Designs  | Hot Mix Asphalt Designs
  • Liquid and Plastic Limits and Plasticity Index |  ASTM D 4318; Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils
    Aggregates and Soils
  • Liquid Limit |  AASHTO T 89; Determining the Liquid Limits of Soils
    Aggregates and Soils
  • Los Angeles Abrasion (Resistance to Degradation) |  AASHTO T 96; Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
    Aggregates and Soils
  • Los Angeles Abrasion (Resistance to Degradation) |  ASTM C 131; Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
    Aggregates and Soils
  • Lottman (Modified) |  AASHTO T 283; Test Method for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage
    Pavement Performance Property Tests and Evaluations
  • Marshall Stability & Flow |  AASHTO T 245; Resistance to Plastic Flow of Bituminous Mixtures using Marshall Apparatus
    Pavement Performance Property Tests and Evaluations
  • Marshall Stability & Flow |  AI MS-2; Preparation of Bituminous Specimens by Marshall Apparatus
    Pavement Performance Property Tests and Evaluations
  • Mass |  ASTM D 5261; Test Method for Measuring Mass per Unit Area of Geotextiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Mechanical Analysis of Extracted Aggregates |  AASHTO T 30; Mechanical Analysis of Extracted Aggregates (requires extraction by AASHTO T 164 / ASTM D 2172 Quantitative Extraction of Bitumen…)
    Pavement Performance Property Tests and Evaluations
  • Melt Flow Rate |  ASTM D 1238; Melt Flow Rate of Thermoplastics by Extrusion Plastometer
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Melting |  ASTM D 5167, Section 15; Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation Required for Individual and/or Specification Tests noted by *
    Flexible Pavement Marker Adhesive
  • Metal Contamination |  FL DOT FM 5-559, Section 5; Ground Tire Rubber
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Metals & Metals Sample Preparation |  ASTM D 5708; Determination of Nickel, Vanadium and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectroscopy
    Crude Oil Analysis & Evaluations
  • Metals (8 RCRA metals) |  EPA 1311/6010; Test Method for Determining 8 RCRA TCLP Metals
    Asphalts: Chemical Analysis
  • Metals (Ni, Va, Fe) |  ASTM D 5708; Determination of Nickel, Vanadium and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectroscopy
    Asphalts: Chemical Analysis
  • Micro-Deval |  AASHTO T 327; Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
    Aggregates and Soils
  • Mineral Matter |  ASTM D 6511, Section 19; Test Method for Solvent Bearing Bituminous Compounds, Mineral Matter (ASTM D 4)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Mineral Stabilizers and Bitumen |  ASTM D 6511, Section 18; Test Method for Solvent Bearing Bituminous Compounds, Mineral Stabilizers (ASTM D 4)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Miscibility with Water |  AASHTO T 59, Section 15; Miscibility of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Miscibility with Water |  ASTM D 6999; Miscibility of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Mix Time |  ISSA TB 113; Mix Time
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Moisture (Effect of) - Hot Mix / Paving Mixtures |  ASTM D 4867 (4867M); Test Method for Determining Effect of Moisture on Asphalt Concrete Paving Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Moisture - Aggregates |  ASTM C 566; Test Method for Total Moisture Content of Aggregate by Drying
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Moisture - Aggregates |  ASTM D 1864; Moisture in Mineral Aggregate Used on Built-Up-Roofs
    Asphalt Binders: Modified & Special
  • Moisture - Aggregates |  ASTM D 1864; Moisture in Mineral Aggregate Used on Built-Up-Roofs
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Moisture Content |  AASHTO T 265; Laboratory Determination of Moisture Content of Soils
    Aggregates and Soils
  • Moisture Content |  AASHTO T 329; Moisture Content of Hot-Mix (HMA) by Oven Method
    Pavement Performance Property Tests and Evaluations
  • Moisture Content |  ASTM C 566; Test Method for Total Moisture Content of Aggregate by Drying
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Moisture Content |  ASTM D 2216; Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
    Aggregates and Soils
  • Moisture Content |  FL DOT FM 5-559, Section 4; Ground Tire Rubber
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Moisture or Volatile Content |  AASHTO T 110; Moisture of Volatile Distillates in Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Moisture or Volatile Content |  ASTM D 1461; Moisture of Volatile Distillates in Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Moisture or Volatile Distillates - Mixture |  ASTM D 1461; Moisture of Volatile Distillates in Bituminous Paving Mixtures
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Moisture Resistance - Hot Mix / Paving Mixtures |  AASHTO T 283; Test Method for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage
    Mix Designs  | Hot Mix Asphalt Designs
  • Moisture Resistance - Hot Mix / Paving Mixtures |  ASTM D 1075; Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Multiple Stress Creep & Recovery |  AASHTO TP 70-07; Multiple Stress Creep Recovery Test of Asphalt Binders using A Dynamic Shear Rheometer (MSCR)
    Asphalt Binders: Modified & Special
  • Multiple Stress Creep & Recovery |  AASHTO TP 70-07; Multiple Stress Creep Recovery Test of Asphalt Binders using A Dynamic Shear Rheometer (MSCR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • n-Heptane / n-Pentane Insolubles |  ASTM D 3279; n-Heptane Insolubles (also other solvents)
    Asphalt Binders: Conventional Properties
  • Natural Rubber |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 11-13
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Nitrogen |  ASTM D 4629; Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence
    Crude Oil Analysis & Evaluations
  • Nonvolatile Content |  ASTM D 6511, Section 7; Test Method for Solvent Bearing Bituminous Compounds, Nonvolatile
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Oil Distillate by Micro Distillation |  AASHTO T 59; Distillation of Petroleum Products at Atmospheric Pressure
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Oil Distillate by Micro Distillation |  ASTM D 86; Distillation of Petroleum Products at Atmospheric Pressure
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Oil Swell |  ASTM D 471; Test Method for Rubber Property - Effect of Liquids
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • Opening Size |  ASTM D 4751; Test Method for Determining Apparent Opening Size of a Geotextile
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Outdoor Weathering |  PRI Outdoor Weathering; Outdoor Weathering of Products; Monitored, Natural Hot / Humid Florida Environment, Enhanced Water Exposures, Uses include dense grade pavements, OGFC's, SMA's, Pavement Maintenance, Rejuvenation and Rehabilitation Products
    Pavement Performance Property Tests and Evaluations
  • Ozone Resistance |  ASTM D 1149; Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • PAH’s |  EPA 1311/8270; Test Method for Determining TCLP Bases, Neutrals, and Acids
    Asphalts: Chemical Analysis
  • Paraffin Content |  EN 12606; Test Method for Determination of Paraffin Wax Content
    Asphalts: Chemical Analysis
  • Paraffin Content |  EN 12606-1; Test Method for Determination of Paraffin Wax Content
    Asphalt Binders: Conventional Properties
  • Paraffin Content |  EN 12606-1; Test Method for Determination of Paraffin Wax Content
    Asphalt Binders: Penetration and Viscosity - Graded
  • Particle Charge |  ASTM D 244, Section 11-16; Particle Charge
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Particle Coating - Hot Mix / Paving Mixtures |  AASHTO T 195; Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
    Aggregates and Soils
  • Particle Coating - Hot Mix / Paving Mixtures |  ASTM D 2489; Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
    Aggregates and Soils
  • Particle Coating - Hot Mix / Paving Mixtures |  ASTM D 2489; Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Particle Size by Hydrometer |  ASTM D 422; Test Method for Particle-Size Analysis of Soils
    Aggregates and Soils
  • Penetration |  AASHTO T 49; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Penetration |  AASHTO T 49; Test Method for Penetration of Bituminous Materials
    Flexible Pavement Marker Adhesive
  • Penetration |  AASHTO T 49; Test Method Penetration of Bituminous Materials
    Asphalt Binders: Conventional Properties
  • Penetration |  AASHTO T 49; Test Method Penetration of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Penetration |  AASHTO T 49; Test Method Penetration of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Penetration |  AASHTO T 49; Test Method Penetration of Bituminous Materials
    Cutback Asphalts and Products
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Conventional Properties
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Cutback Asphalts and Products
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Flexible Pavement Marker Adhesive
  • Penetration |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Recycling Agents and Additives
  • Penetration |  EN 1426; Penetration of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Penetration |  EN 1426; Penetration of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Penetration |  GOST 11501; Penetration of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Penetration - Asphalt Binders |  AASHTO T 49; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Penetration - Asphalt Binders |  AASHTO T 49; Test Method for Penetration of Bituminous Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Penetration - Asphalt Binders |  AASHTO T 49; Test Method for Penetration of Bituminous Materials
    Coal Tar Pitch
  • Penetration - Asphalt Binders |  AASHTO T 49; Test Method for Penetration of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Penetration - Asphalt Binders |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Penetration - Asphalt Binders |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Penetration - Asphalt Binders |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Coal Tar Pitch
  • Penetration - Asphalt Binders |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Penetration - Asphalt Binders |  EN 1426; Penetration of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Penetration - Asphalt Binders |  EN 1426; Penetration of Bituminous Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Penetration - Asphalt Binders |  EN 1426; Penetration of Bituminous Materials
    Coal Tar Pitch
  • Penetration - Asphalt Binders |  EN 1426; Penetration of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Penetration, Cone |  ASTM D 217; Test Method for Cone Penetration of Lubricating Greases
    Asphalt Binders: Conventional Properties
  • Penetration, Cone |  CALTRANS 4B
    Asphalt Binders: Conventional Properties
  • Performance Strength |  ASTM D 4885; Test Method for Determining Performance Strength of Geomembranes by Wide Strip Tensile Method
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Permanent Deformation |  BS DD 226 (Draft); Method for Determining Resistance to Permanent Deformation of Bituminous Mixtures Subject to Unconfined Dynamic Loading
    Pavement Performance Property Tests and Evaluations
  • Permanent Shear Strain & Stiffness |  AASHTO T 320; Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
    Pavement Performance Property Tests and Evaluations
  • Permeability |  AASHTO T 215; Permeability of Granular Soils (Constant Head)
    Aggregates and Soils
  • Permeability |  ASTM D 2434; Permeability of Granular Soils (Constant Head)
    Aggregates and Soils
  • Permeability (Impermeability) |  ASTM D 5084; Test Method for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
    Pavement Performance Property Tests and Evaluations
  • Permeability (Impermeability) |  PRI TM 029; Determination of Permeability (Hydraulic Conductivity) of Porous Asphalt Cement
    Pavement Performance Property Tests and Evaluations
  • Permeability (Permeable) |  ASTM PS 129; Test Method for Measurement of Permeablity of Bituminous Paving Mixtures Using a Flexible Wall Permeameter
    Pavement Performance Property Tests and Evaluations
  • Permeability (Permeable) |  FL DOT FM 5-565
    Pavement Performance Property Tests and Evaluations
  • Permeability, Water |  ASTM D 4491; Test Method for Water Permeability of Geotextiles by Permittivity
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • pH |  AASHTO T 200; Test Method for pH of Aqueous Solutions With the Glass Electrode
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • pH |  AASHTO T 200; Test Method for pH of Aqueous Solutions With the Glass Electrode
    Rejuvenators and Sealers  | Liquid Sealers
  • pH |  ASTM E 70; Test Method for pH of Aqueous Solutions With Glass Electrode
    Release Agents (for Truck Beds, Tools and Other)
  • pH |  ASTM E 70; Test Method for pH of Aqueous Solutions With Glass Electrode
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • pH |  ASTM E 70; Test Method for pH of Aqueous Solutions With Glass Electrode
    Rejuvenators and Sealers  | Liquid Sealers
  • Pigment Content |  ASTM D 2371; Test Method for Pigment Content of Solvent-Reducible Paints
    Striping Paints (Traffic Marking)
  • Pilot Mill Emulsions |  PRI Pilot Mill; Our pilot (laboratory scale) high shear emulsion mill provides the ability to assess chemical, clay stablized and / or modified emulsions using binary or tertiary feeds. Raw materials (asphalts, emulsifiers, soap solutions, clay slurries, additives, and modifers) and prototype finished products can be assessed using the pilot mill.
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Pliability at 0°C (32°F) |  ASTM D 6511, Section 13; Test Method for Solvent Bearing Bituminous Compounds, Pliability
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Polishing |  AASHTO T 279; Accelerated Polishing of Aggregates Using British Wheel
    Aggregates and Soils
  • Polishing |  ASTM D 3319; Accelerated Polishing of Aggregates Using British Wheel
    Aggregates and Soils
  • Polymer (GTR/CR) Content (TX DOT) |  TX DOT Tex 533-C
    Asphalt Binders: Ground Tire Rubber Modified
  • Polymer Blending |  PRI Polymer Blending; A variety of high and low shear blending and / or mixing is available as well as a full range of process variables. Blending can be done in batch type high and low shear mills as well as single or multiple pass small schale laboratory continous mills.
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Polymer Content |  AASHTO T 302; Polymer Content of Polymer-Modified Emulsified Asphalt and Residue and Asphalt Binders (calibration curve required)
    Asphalt Binders: Modified & Special
  • Polymer Content |  AASHTO T 302; Polymer Content of Polymer-Modified Emulsified Asphalt and Residue and Asphalt Binders (calibration curve required)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Polymer Separation (TX DOT) |  TX DOT Tex 540-C
    Asphalt Binders: Ground Tire Rubber Modified
  • Pour Point |  ASTM D 97; Pour Point of Petroleum Products
    Crude Oil Analysis & Evaluations
  • Proctor Compaction |  AASHTO T 180; Moisture-Density Relations of Soils Using a 4.54-kg (10 lb) Rammer and a 457-mm (18-in) Drop
    Aggregates and Soils
  • Proctor Compaction |  ASTM D 1557; Test Method for Laboratory Compaction Characteristics of Soil Using Modified Effort
    Aggregates and Soils
  • Product Development / Improvement  |  PRI Development / Improvement; PRI's professional staff provides a wealth of experience to design and manage projects involving asphalt from crude oil refining to final pavement proformance. Our technical staff and our comprehensive in house testing capabilities provide a cost effective and efficient way to develop or improve products.
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Puncture Strength |  ASTM D 6241; Test Method for Static Puncture Strength of Geotextiles and Geotextile Related Products Using a 50mm Probe
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Quantitative Extraction of Asphalt Binder |  AASHTO T 164, Section Method A ; Quantitative Extraction of Bitumen from Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Quantitative Extraction of Asphalt Binder |  AASHTO T 319; Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
    Pavement Performance Property Tests and Evaluations
  • Quantitative Extraction of Asphalt Binder |  ASTM D 2172; Quantitative Extraction of Asphalt Binder from Hot-Mix Asphalt (HMA)
    Pavement Performance Property Tests and Evaluations
  • Quick-Set Emulsified Asphalt Identification |  ISSA TB 102; Mixing, Setting and Water Resistance Test to Identify 'Quick-Set' Emulsified Asphalt
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Quinoline Insolubles |  ASTM D 2318; Quinoline- Insolubles Content of Tar and Pitch
    Asphalt Binders: Conventional Properties
  • RAP (recovered binder viscosity) |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Pavement Performance Property Tests and Evaluations
  • RAP (recovered binder viscosity) |  ASTM D 2171; Viscosity of Asphalts by Vacuum Capillary Viscometer
    Pavement Performance Property Tests and Evaluations
  • RAP (Recovery) |  AASHTO T 170; Recovery of Asphalt from Solution by Abson Recovery
    Pavement Performance Property Tests and Evaluations
  • RAP (Recovery) |  ASTM D 1856; Recovery of Asphalt from Solution by Abson Recovery
    Pavement Performance Property Tests and Evaluations
  • RAP or Millings Recovered Binder Viscosity |  AASHTO T 164; Extraction + ASTM D 5404; Recovery + ASTM D 2171; Absolute Viscosity
    Aggregates and Soils
  • RAP or Millings Recovered Binder Viscosity |  ASTM D 2172; Extraction + ASTM D 5404; Recovery + ASTM D 2171; Absolute Viscosity
    Aggregates and Soils
  • Raveling - Mixtures |  ASTM D 7196; Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
    Mix Designs  | Cold Mixes
  • RCRA Metals |  EPA 1311/6010; Test Method for Determining 8 RCRA TCLP Metals
    Asphalts: Environmental Analysis
  • Recovery |  ASTM D 545, Section 7.2; Recovery; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Redispersibility |  ASTM D 4866, Section 6.1; Test Method for Redispersibility; Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations
    Rejuvenators and Sealers  | Liquid Sealers
  • Reflectance |  AASHTO T 250, Section 7; Reflectance, Color and Yellowness Index
    Striping Paints (Traffic Marking)
  • Reflectance |  ASTM E 1349; Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
    Striping Paints (Traffic Marking)
  • Reflectance of Aluminum Coatings |  ASTM D 6511, Section 15; Test Method for Solvent Bearing Bituminous Compounds, Reflectance
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Reflective Crack Resistance (Beam on Elastic Foundation) |  PRI TM 036; Test Method to Determine Resistance to Reflective Crack Formation Using Asphalt Pavement Analyzer
    Pavement Performance Property Tests and Evaluations
  • Reflective Crack Resistance (Beam on Elastic Foundation) |  PRI TM 037; Test Method for Determination of Fabric Interlays to Reflective Crack Formation in HMA Specimens Subjected to Cycle Loading
    Pavement Performance Property Tests and Evaluations
  • Reflective Crack Resistance – Beam of Elastic Foundation |  PRI TM 037; Test Method for Determination of Fabric Interlays to Reflective Crack Formation in HMA Specimens Subjected to Cycle Loading
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Reflective Crack Resistance – APA Method |  PRI TM 036; Test Method to Determine Resistance to Reflective Crack Formation Using Asphalt Pavement Analyzer
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Release Capability - Arkansas |  State DOTs QPL 410.06; Release Compound for Bituminous Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Indiana |  State DOTs ITM No. 576-01T, Section para 6.2; Laboratory Evaluation of Anti-Adhesive Agents, Mixture Test
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Kansas |  State DOTs KTMR-19; Method of Testing Release Compounds for Bituminous Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Kentucky |  State DOTs KM 64-422-03; Asphalt Release Agent
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Mississippi |  State DOTs Release Agents ; Slide Test
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Ohio |  State DOTs; As Defined in Laboratory Test Procedure for Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Oklahoma |  State DOTs 441.03; Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Tennessee |  State DOTs QPL 21; Release Compounds for Asphalt Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Texas |  TX DOT Tex-239-F; Asphalt Release Agent, Mixture Slide Test, Asphalt Performance Test
    Release Agents (for Truck Beds, Tools and Other)
  • Repeated Shear |  AASHTO T 320; Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
    Pavement Performance Property Tests and Evaluations
  • Residue by Evaporation |  AASHTO T 59, Section 7; Residue by Evaporation of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue by Evaporation |  ASTM D 2939, Section 8; Residue by Evaporation
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue by Evaporation |  ASTM D 2939, Section 8; Residue by Evaporation
    Rejuvenators and Sealers  | Liquid Sealers
  • Residue by Evaporation |  ASTM D 6934; Residue by Evaporation of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue by Evaporation |  CALTRANS 331; Method of Test for Residue by Evaporation of Latex Modified Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue Penetration |  ASTM D 243; Residue of Specified Penetration
    Cutback Asphalts and Products
  • Resilience |  ASTM D 5329; Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    Asphalt Binders: Ground Tire Rubber Modified
  • Resilience |  ASTM D 5329; Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    Asphalt Binders: Modified & Special
  • Resilience |  ASTM D 5329; Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Resilience* |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilience* |  ASTM D 5329, Section 12; Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilience, Oven-Aged* |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilience, Oven-Aged* |  ASTM D 5329, Section 13; Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilient Modulus |  ASTM D 4123; Indirect Tension Test for resilient Modulus of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Resistance to Alkali |  MIL-C-1848OB; Test Method for Resistance to Alkali, para 4.3.1.6
    Coal Tar Pitch
  • Resistance to Freezing |  AASHTO T 161; Method of Test for Resistance of Concrete to Rapid Freezing and Thawing
    Concrete
  • Resistance to Freezing |  ASTM D 2939, Section 6; Resistance to Freezing
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Resistance to Freezing |  ASTM D 2939, Section 6; Resistance to Freezing
    Rejuvenators and Sealers  | Liquid Sealers
  • Resistance to Hardening |  EN 12607-1 or -3
    Asphalt Binders: Penetration and Viscosity - Graded
  • Resistance to Heat |  ASTM D 2939, Section 14; Resistance to Heat
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Heat |  ASTM D 2939, Section 14; Test Method for Resistance to Heat at 80°C
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Impact |  ASTM D 2939, Section 26; Resistance to Impact
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Impact |  ASTM D 2939, Section 26; Resistance to Impact
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Impact |  MIL-C-1848OB; Test Method for Resistance to Impact, para 4.3.1.5
    Coal Tar Pitch
  • Resistance to Impact after Accelerated Weathering |  ASTM D 2939, Section 27; Resistance to Impact After Accelerated Weathering
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Impact after Accelerated Weathering |  ASTM D 2939, Section 27; Resistance to Impact After Accelerated Weathering
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Kerosene |  ASTM D 2939, Section 25; Resistance to Kerosene
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Kerosene |  ASTM D 2939, Section 25; Resistance to Kerosine
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Kerosene |  ASTM D 4866, Section 6.4; Resistance to Kerosene (ASTM D 4866 (legacy), Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Plastic Flow - Mixture |  AASHTO T 245; Resistance to Plastic Flow of Bituminous Mixtures using Marshall Apparatus
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Resistance to Volatilization |  ASTM D 2939, Section 23; Resistance to Volatization
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Volatilization |  ASTM D 2939, Section 23; Resistance to Volatization
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Water |  ASTM D 2939, Section 15; Resistance to Water
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Water |  ASTM D 2939, Section 15; Resistance to Water
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Conventional Properties
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Modified & Special
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Recycling Agents and Additives
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Conventional Properties
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Modified & Special
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Recycling Agents and Additives
  • Rotational (Brookfield) Viscosity |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalt Binders: Ground Tire Rubber Modified
  • Rotational (Brookfield) Viscosity |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Flexible Pavement Marker Adhesive
  • Rotational (Brookfield) Viscosity |  ASTM D 2196 (Modified); Rheological Properties of Non-Newtonian Material by Rotational (Brookfield type) Viscometer
    Asphalt Binders: Ground Tire Rubber Modified
  • Rotational (Brookfield) Viscosity |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Flexible Pavement Marker Adhesive
  • Rotational (Brookfield) Viscosity |  ASTM D 5801; Toughness and Tenacity of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Roundness |  ASTM D 1155; Test Method for Roundness of Glass Spheres
    Striping Paints (Traffic Marking)
  • Rubber Content |  TX DOT Tex 544-C; Rubber Content for Rubber-Asphalt Crack Sealant
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Rubber Hydrocarbon Content |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 24
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Rusting |  ASTM D 610; Test Method for Evaluating Degree of Rusting on Painted Steel Surface
    Striping Paints (Traffic Marking)
  • Rutting Resistance |  AASHTO TP 63; Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)
    Pavement Performance Property Tests and Evaluations
  • Sag |  MIL-C-1848OB; Tesst Method for Sag at 23 °C, para 4.3.1.3
    Coal Tar Pitch
  • Salt Fog (Corrosion Resistance) |  ASTM D 5894; Practice for Cyclic Fog Salt For / UV Exposure of Painted Metal
    Striping Paints (Traffic Marking)
  • Sample Preparation |  ASTM D 4887; Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
    Recycling Agents and Additives
  • Sample Preparation & Bulk Specific Gravity |  ASTM D 7229; Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
    Mix Designs  | Cold Mixes
  • Sample Preparation - Hot Mix / Paving Mixtures |  AASHTO T 312; Preparing and Determining Density of Hot-Mix Asphalt (HMA) Specimens by Means of Superpave Gyrator Compactor
    Mix Designs  | Hot Mix Asphalt Designs
  • Sample Preparation - Hot Mix / Paving Mixtures |  AI MS-2; Preparation of Bituminous Specimens by Marshall Apparatus
    Mix Designs  | Hot Mix Asphalt Designs
  • Sample Preparation - Hot Mix / Paving Mixtures |  ASTM D 5167, Section 15; Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation Required for Individual and/or Specification Tests noted by *
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Sample Preparation - Hot Mix / Paving Mixtures |  ASTM D 6926; Preparation of Bituminous Specimens by Marshall Apparatus
    Mix Designs  | Hot Mix Asphalt Designs
  • Sample Size Reduction |  AASHTO T 248; Reducing Samples of Aggregate to Testing Size
    Aggregates and Soils
  • Sample Size Reduction |  AASHTO T 328; Reducing Samples of Hot-Mix Asphalt to Testing Size
    Pavement Performance Property Tests and Evaluations
  • Sample Size Reduction |  ASTM C 702; Practice for Reducing Samples of Aggregate to Testing Size
    Aggregates and Soils
  • Sampling |  ASTM D 4354; Practice for Sampling of Geosynthetics for Testing
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Sand Equivalency - Aggregates |  AASHTO T 176; Plastic Fines in Graded Aggregates and Soild by Use of Sand Equivalent Test
    Aggregates and Soils
  • Sand Equivalency - Aggregates |  ASTM D 2419; Test Method for Sand Equivalent Value of Soils and Fine Aggregates
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Sand Equivalency - Aggregates |  ASTM D 2419; Test Method for Sand Equivalent Value of Soils and Fine Aggregates
    Mix Designs  | Hot Mix Asphalt Designs
  • Sand Equivalent Values |  ASTM D 2419; Test Method for Sand Equivalent Value of Soils and Fine Aggregates
    Aggregates and Soils
  • Sand Equivalent Values |  ASTM D 2419; Test Method for Sand Equivalent Value of Soils and Fine Aggregates
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • SARA Analysis by Iatroscan |  ASTM D 4124; Seperation of Asphalt into Four Fractions (asphaltenes, saturates, naphthene aromatics, and polar aromatics)
    Asphalts: Chemical Analysis
  • SBS Content |  AASHTO T 302; Polymer Content of Polymer-Modified Emulsified Asphalt and Residue and Asphalt Binders (calibration curve required)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • SBS Content by FT-IR |  PRI TM-031; Quantitative Analysis of Asphalts for Styrene-Butadiene Styrene Copolymer (SBS) by FT-IR
    Asphalt Binders: Modified & Special
  • SBS Content by FT-IR |  PRI TM-031; Quantitative Analysis of Asphalts for Styrene-Butadiene Styrene Copolymer (SBS) by FT-IR
    Asphalts: Chemical Analysis
  • SBS Identification |  PRI Infrared Analysis
    Asphalts: Chemical Analysis
  • SBS Presence |  PRI TM-031; Quantitative Analysis of Asphalts for Styrene-Butadiene Styrene Copolymer (SBS) by FT-IR
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Scaling Resistance  |  ASTM C 672M; Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
    Concrete
  • Schultze-Breurer- Ruck (SB-R) |  ISSA TB 144; Test Method for Classification of Aggregate Filler - Bitumen Compatibility by Schultze-Breurer & Ruck Procedures
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Scuff Resistance |  FAA EB 46A; Determination of Initial set and Final Scuff Resistance Characteristics
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Sediment by Extraction |  ASTM D 473; Sediment in Crude Oils and Fuels by the Extraction Method
    Crude Oil Analysis & Evaluations
  • Separation (‘cigar tube test’) |  ASTM D 7173; Determining Separation Tendency of Polymer from Polymer Modified Asphalt
    Asphalt Binders: Modified & Special
  • Separation Test |  ASTM D 7173; Determining Separation Tendency of Polymer from Polymer Modified Asphalt
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Settlement |  AASHTO T 59, Section 11; Settlement
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Settlement |  AASHTO T 59, Section 18; Settlement and Storage Stability of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Settlement |  ASTM D 6930; Settlement and Storage Stability of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Settlement |  ASTM D 6930; Settlement and Storage Stability of Emulsified Asphalts
    Rejuvenators and Sealers  | Liquid Sealers
  • Settlement and Storage Stability |  ASTM D 6930; Settlement and Storage Stability of Emulsified Asphalts
    Recycling Agents and Additives
  • Sieve Analysis (Glass Beads) |  ASTM D 1214; Test Method for Sieve Analysis of Glass Spheres
    Striping Paints (Traffic Marking)
  • Sieve Analysis (Gradation) - Aggregates |  AASHTO T 27; Sieve Analysis of Fine and Coarse Aggregates
    Aggregates and Soils
  • Sieve Analysis (Gradation) - Aggregates |  ASTM C 136; Test Method for Sieve Analysis of Fine and Coarse Aggregates
    Aggregates and Soils
  • Sieve Analysis (Gradation) - Aggregates |  ASTM C 136; Test Method for Sieve Analysis of Fine and Coarse Aggregates
    Mix Designs  | Cold Mixes
  • Sieve Analysis (Gradation) - Aggregates |  ASTM C 136; Test Method for Sieve Analysis of Fine and Coarse Aggregates
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Sieve Analysis (Gradation) - Aggregates |  ASTM C 136; Test Method for Sieve Analysis of Fine and Coarse Aggregates
    Mix Designs  | Hot Mix Asphalt Designs
  • Sieve Analysis (Granular Mineral – Roofing) |  ASTM D 451; Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing Products
    Aggregates and Soils
  • Sieve Analysis (Mineral Filler) |  AASHTO T 37; Sieve Analysis of Mineral Filler for Bituminous Paving Materials
    Aggregates and Soils
  • Sieve Analysis (Mineral Filler) |  ASTM D 546; Sieve Analysis of Mineral Filler for Paving Materials
    Aggregates and Soils
  • Sieve Analysis (Surfacing- Roofing) |  ASTM D 452; Sieve Analysis of Surfacing for Asphalt Roofing Products
    Aggregates and Soils
  • Sieve Analysis (washed, finer than 75 µm – 200 mesh) |  AASHTO T 11; Test Method for Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
    Aggregates and Soils
  • Sieve Analysis (washed, finer than 75 µm – 200 mesh) |  ASTM C 117; Test Method for Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
    Aggregates and Soils
  • Sieve Test |  AASHTO T 59, Section 13; Oversized Particles in Emulsified Asphalts (Sieve Test)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Sieve Test |  ASTM D 6933; Oversized Particles in Emulsified Asphalts (Sieve Test)
    Recycling Agents and Additives
  • Sieve Test |  ASTM D 6933; Oversized Particles in Emulsified Asphalts (Sieve Test)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Sieve Test |  ASTM D 6933; Oversized Particles in Emulsified Asphalts (Sieve Test)
    Rejuvenators and Sealers  | Liquid Sealers
  • Sieve Test |  NV DOT T 730; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Modified & Special
  • Sieve Test |  NV DOT T 730; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Sieve Test |  OH DOT 908 H; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Modified & Special
  • Sieve Test |  OH DOT 908 H; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Sieve Test |  TN DOT; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Modified & Special
  • Sieve Test |  TN DOT; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Sieve Test (hot) |  NV DOT T 730; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Conventional Properties
  • Sieve Test (hot) |  OH DOT 908 H; Test Method for Determining Undispersed Polymer by Hot Sieving
    Asphalt Binders: Conventional Properties
  • Slurry Seal Compatibility |  ISSA TB 115; Determination of Slurry Seal Compatibility
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Smoke Point |  FL DOT FM 5-519; Determination of Smoke Point by Cleveland Open Cup Tester
    Asphalt Binders: Conventional Properties
  • Smoke Point |  FL DOT FM 5-519; Determination of Smoke Point by Cleveland Open Cup Tester
    Asphalt Binders: Modified & Special
  • Smoke Point |  FL DOT FM 5-519; Determination of Smoke Point by Cleveland Open Cup Tester
    Asphalt Binders: Penetration and Viscosity - Graded
  • Smoke Point |  FL DOT FM 5-519; Determination of Smoke Point by Cleveland Open Cup Tester
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Smoke Point |  FL DOT FM 5-519; Determination of Smoke Point by Cleveland Open Cup Tester
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalt Binders: Conventional Properties
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalt Binders: Ground Tire Rubber Modified
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalt Binders: Modified & Special
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Coal Tar Pitch
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Flexible Pavement Marker Adhesive
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Softening Point |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalt Binders: Conventional Properties
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalt Binders: Ground Tire Rubber Modified
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalt Binders: Modified & Special
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Coal Tar Pitch
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Flexible Pavement Marker Adhesive
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Softening Point |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Softening Point |  EN 1427; Softening Point of Bitumen
    Asphalt Binders: Modified & Special
  • Softening Point |  EN 1427; Softening Point of Bitumen
    Asphalt Binders: Penetration and Viscosity - Graded
  • Softening Point |  EN 1427; Softening Point of Bitumen
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Softening Point |  EN 1427; Softening Point of Bitumen
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Softening Point |  EN 1427; Softening Point of Bitumen
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Softening Point |  GOST 11506; Softening Point of Bitumen
    Asphalt Binders: Penetration and Viscosity - Graded
  • Softening Point (legacy) |  ASTM D 3461; Test Method for Softening Point of Asphalt and Pitch (Mettler Cup and Ball Method)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Softening Point* |  AASHTO T 53; Softening Point of Bitumen (Ring and Ball Apparatus)
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Softening Point* |  ASTM D 36; Softening Point of Bitumen (Ring & Ball Apparatus)
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Softening Points |  AASHTO M 248; Test Method for Softening Point After Heating, para 4.3.5 (ASTM D 36)
    Striping Paints (Traffic Marking)
  • Solar Reflectance |  ASTM C 1549; Test Method for Determination of Solar Reflectance Near Ambient Temperature using a Portable Solar Reflectometer
    Green/Sustainable Products
  • Solar Reflectance |  ASTM C 1549; Test Method for Determination of Solar Reflectance Near Ambient Temperature using a Portable Solar Reflectometer
    Asphalts: Environmental Analysis  | Leed Pavement Qualification - by PRI-CMT
  • Solar Reflectance |  ASTM C 1549; Test Method for Determination of Solar Reflectance Near Ambient Temperature using a Portable Solar Reflectometer
    Pavement Performance Property Tests and Evaluations  | Leed Pavement Qualification - by PRI-CMT
  • Solar Reflectance Index (SRI) |  ASTM E 1980; Practice for Calculating Solar Reflectance Index for Horizontal and Low Slope Opaque Surfaces
    Asphalts: Environmental Analysis  | Leed Pavement Qualification - by PRI-CMT
  • Solar Reflectance Index (SRI) |  ASTM E 1980; Practice for Calculating Solar Reflectance Index for Horizontal and Low Slope Opaque Surfaces
    Pavement Performance Property Tests and Evaluations  | Leed Pavement Qualification - by PRI-CMT
  • Solids |  ASTM D 1644-A; Test Method for Non-Volatiles of Varnishes
    Release Agents (for Truck Beds, Tools and Other)
  • Solubility |  AASHTO T 44; Solubility of Bituminous Materials
    Cutback Asphalts and Products
  • Solubility |  ASTM D 2042; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Cutback Asphalts and Products
  • Solubility |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Recycling Agents and Additives
  • Solubility |  ASTM D 6511, Section 8; Test Method for Solvent Bearing Bituminous Compounds, Solubility (ASTM D 4)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Solubility in CS2 |  ASTM D 2939, Section 24; Solubility of Residue in Trichloroethylene
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Solubility in TCE |  AASHTO T 44; Solubility of Asphalt Materials in Trichloroethylene
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Solubility in TCE |  AASHTO T 44; Solubility of Asphalt Materials in Trichloroethylene
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Solubility in TCE |  AASHTO T 44; Solubility of Asphalt Materials in Trichloroethylene
    Coal Tar Pitch
  • Solubility in TCE |  AASHTO T 44; Solubility of Asphalt Materials in Trichloroethylene
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Solubility in TCE |  AASHTO T 44; Solubility of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Solubility in TCE |  AASHTO T 44; Solubility of Bituminous Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Binders: Conventional Properties
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Binders: Ground Tire Rubber Modified
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Asphalt Binders: Modified & Special
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Coal Tar Pitch
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Solubility in TCE |  ASTM D 2042; Solubility of Asphalt Materials in Trichloroethylene (also other solvents)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Solubility in TCE |  ASTM D 2939, Section 24; Solubility of Residue in Trichloroethylene
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Binders: Modified & Special
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Coal Tar Pitch
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Solubility in TCE |  EN 12592; Solubility of Asphalt Material in Trichloroethylene (also other solvents)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Solubility in Toluene by Centrifuge |  ASTM D 5546; Test Method for Solubility of Polymer-Modified Asphalt Materials in 1,1,1-Trichloroethane
    Asphalt Binders: Conventional Properties
  • Solubility of Modified Asphalts |  ASTM D 5546; Test Method for Solubility of Polymer-Modified Asphalt Materials in 1,1,1-Trichloroethane
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Solubility* |  ASTM D 5329, Section 17; Solubility
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Soundness (Freezing & Thawing) |  AASHTO T 103; Soundness of Aggregates by Freezing and Thawing
    Aggregates and Soils
  • Soundness (Magnesium or Sodium) |  AASHTO T 104; Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
    Aggregates and Soils
  • Soundness (Magnesium or Sodium) |  ASTM C 88; Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
    Aggregates and Soils
  • Soundness - Aggregates |  ASTM C 88; Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Conventional Properties
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Modified & Special
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Coal Tar Pitch
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Specific Gravity |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Rejuvenators and Sealers  | Liquid Sealers
  • Specific Gravity |  ASTM D 3289; Density of Semi-Solid and Solid Bituminous Materials (Ni Crucible Method)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Specific Gravity |  ASTM D 3289; Density of Semi-Solid and Solid Bituminous Materials (Ni Crucible Method)
    Rejuvenators and Sealers  | Liquid Sealers
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Conventional Properties
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Modified & Special
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Coal Tar Pitch
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Specific Gravity |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Rejuvenators and Sealers  | Liquid Sealers
  • Specific Gravity |  AZ DOT TM 714
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Specific Gravity |  FL DOT FM 5-559, Section 4; Ground Tire Rubber
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Specific Gravity & Absorption - Fine Aggregates |  ASTM C 128; Test Method for Density, Relative Density (Specfic Gravity) and Absorption of Fine Aggregates
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Specific Gravity & Absorption - Coarse -Aggregates  |  ASTM C 127; Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Specific Gravity & Absorption - Fine Aggregates |  ASTM C 128; Test Method for Density, Relative Density (Specfic Gravity) and Absorption of Fine Aggregates
    Mix Designs  | Hot Mix Asphalt Designs
  • Specific Gravity & Absorption of Coarse Aggregate |  AASHTO T 85; Specific Gravity and Absorption of Coarse Aggregates
    Aggregates and Soils
  • Specific Gravity & Absorption of Coarse Aggregate |  ASTM C 127; Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
    Aggregates and Soils
  • Specific Gravity & Absorption of Fine Aggregate |  AASHTO T 84; Specific Gravity and Absorption of Fine Aggregates
    Aggregates and Soils
  • Specific Gravity & Absorption of Fine Aggregate |  ASTM C 128; Test Method for Density, Relative Density (Specific Gravity) and Absorption of Fine Aggregates
    Aggregates and Soils
  • Specific Gravity & Absorption- Coarse Aggregates  |  ASTM C 127; Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
    Mix Designs  | Cold Mixes
  • Specific Gravity & Absorption- Fine Aggregates |  ASTM D 2489; Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
    Mix Designs  | Cold Mixes
  • Specific Gravity & Absorption-Coarse Aggregates  |  ASTM C 127; Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
    Mix Designs  | Hot Mix Asphalt Designs
  • Specific Gravity (Soil) |  AASHTO T 100; Test Method for Specific Gravity of Soil Solids by Water Pycnometer
    Aggregates and Soils
  • Specific Gravity (Soil) |  ASTM D 854; Test Method for Specific Gravity of Soil Solids by Water Pycnometer
    Aggregates and Soils
  • Specific Gravity and Absorption of Fine Aggregate |  ASTM C 127; Test Method for Density, Relative Density (Specific Gravity) and Absorption of Coarse Aggregates
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Specification Conformance |  ASTM D 4759; Test Method for Determining Specification Conformance of Geosynthetics
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Specimen Preparation |  ISSA TB 148; Test Method for Preparation of Micro-surface and Slurry Seal Specimens for Evaluation by Hot Mixed Asphalt Design Methods (Modified Marshall Test)
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Spot Test |  AASHTO T 102; Spot Test of Asphaltic Materials
    Asphalt Binders: Conventional Properties
  • Spot Test |  AASHTO T 102; Spot Test of Asphaltic Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Spot Test |  AASHTO T 102; Spot Test of Asphaltic Materials
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • SSD |  CA DOT Test 381; Method of Determination of Asphalt Binder Properties Using Dynamic Shear Rheometer (DSR)
    Asphalt Binders: Modified & Special
  • Stain Index |  ASTM D 2746; Staining Tendency of Asphalt
    Asphalt Binders: Conventional Properties
  • Stain Index |  ASTM D 2746; Staining Tendency of Asphalt
    Asphalt Binders: Penetration and Viscosity - Graded
  • Stain Index |  ASTM D 2746; Staining Tendency of Asphalt
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Stiffness by Dynamic Shear |  CALTRANS CT 381
    Asphalt Binders: Ground Tire Rubber Modified
  • Storage Life |  AASHTO M 248; Test Method for Assessing Storage Life (1 year), para 4.4
    Striping Paints (Traffic Marking)
  • Storage Stability |  AASHTO T 59, Section 18; Settlement and Storage Stability of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Storage Stability |  ASTM D 6930; Settlement and Storage Stability of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Storage Stability |  ASTM D 6930; Settlement and Storage Stability of Emulsified Asphalts
    Rejuvenators and Sealers  | Liquid Sealers
  • Sulfur |  ASTM D 2622; Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectroscopy
    Crude Oil Analysis & Evaluations
  • Sulfur |  ASTM D 4294; Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectroscopy
    Crude Oil Analysis & Evaluations
  • Sweep Test |  ASTM D 7000; Sweep Test of Bituminous Emulsion Surface Treatment Samples
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Tar Acids |  ASTM D 453; Test Method for Tar Acids in Creosote-Coal Tar Solutions
    Coal Tar Pitch
  • Tear Strength, Internally Reinforces |  ASTM D 5884; Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Tear Strength, Trapezoid |  ASTM D 4533; Test Method for Trapezoid Tearing Strength of Geotextiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Technical Consulting - General  |  PRI Consulting; Market Survey, Quality Control / Quality Assurance, Seminars, Training
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Tensile Adhesion* |  ASTM D 5329, Section 16; Tensile Adhesion
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Tensile and Elongation |  ASTM D 412; Test Method for Vulcanized Rubber and Thermoplastic Elastomers- Tension
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Tensile Strength |  ASTM D 412; Test Method for Vulcanized Rubber and Thermoplastic Elastomers- Tension
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Tensile Strength |  ASTM D 412; Test Method for Vulcanized Rubber and Thermoplastic Elastomers- Tension
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • Tensile Strength |  ASTM D 4595; Test Method for Tensile Properties of Geotextiles by Wide-Width Strip Method
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Tensile Strength, Polyethylene & Polypropylene |  ASTM D 6693; Test Method for Determining Tensile Properties on Nonreinforced Polyethylene and Flexible Polypropylene Geomembranes
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Tensile Stress |  LA DOT
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Tension Creep |  ASTM D 5262; Test Method for Evaluating Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Theoretical Max. Gravity - Hot Mix / Paving Mixtures |  ASTM D 2041; Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Theoretical Max. Gravity - Hot Mix / Paving Mixtures |  FDOT; Test Method for Theoretical Maximum Gravity
    Mix Designs  | Hot Mix Asphalt Designs
  • Theoretical Maximum Gravity |  AASHTO T 209; Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Theoretical Maximum Gravity |  ASTM D 2041; Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Theoretical Maximum Gravity and Density |  CA DOT Test 309; Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Thickness |  ASTM D 5199; Test Method for Measuring the Normal Thickness of Geosynthetics
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Thickness & Heigh - tHot Mix / Paving Mixtures |  ASTM D 3549; Test Method for Determining Thickness or Height of Compacted Bituminous Paving Mixtures Specimens
    Mix Designs  | Hot Mix Asphalt Designs
  • Thickness, Core |  ASTM D 5994; Test Method for Measuring Core Thickness of Textured Geomembranes
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Thin Film Oven Test (TFOT) |  AASHTO T 179; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Conventional Properties
  • Thin Film Oven Test (TFOT) |  AASHTO T 179; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Thin Film Oven Test (TFOT) |  AASHTO T 179; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Modified & Special
  • Thin Film Oven Test (TFOT) |  AASHTO T 179; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Thin Film Oven Test (TFOT) |  AASHTO T 179; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Thin Film Oven Test (TFOT) |  AASHTO T 179; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Recycling Agents and Additives
  • Thin Film Oven Test (TFOT) |  ASTM D 1754; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Conventional Properties
  • Thin Film Oven Test (TFOT) |  ASTM D 1754; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Thin Film Oven Test (TFOT) |  ASTM D 1754; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Modified & Special
  • Thin Film Oven Test (TFOT) |  ASTM D 1754; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Thin Film Oven Test (TFOT) |  ASTM D 1754; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Thin Film Oven Test (TFOT) |  ASTM D 1754; Test Method for Effects of Heat and Air on Asphaltic Materials (Thin Film Oven Method)
    Recycling Agents and Additives
  • Thin Film Oven Test (TFOT) |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Modified & Special
  • Thin Film Oven Test (TFOT) |  EN 12607-2; Effects of Heat and Air on Asphaltic Materials
    Asphalt Binders: Modified & Special
  • Thin Film Oven Test (TFOT) |  EN 12607-2; Effects of Heat and Air on Asphaltic Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Thin Film Oven Test (TFOT) |  EN 12607-2; Effects of Heat and Air on Asphaltic Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Thin Film Oven Test (TFOT) |  GOST 11506; Effects of Heat and Air on Asphaltic Materials
    Asphalt Binders: Penetration and Viscosity - Graded
  • Tilt Oven Residue |  CA DOT Test 374 Method B; Method for Determining Asphalt Durability Using California Tilt Oven Durability Test
    Asphalt Binders: Modified & Special
  • Tilt Oven Test |  CALTRANS 374 B; Effects of Heat and Air on a Moving Film of Asphalt
    Asphalt Binders: Ground Tire Rubber Modified
  • Titanium Dioxide Content |  AASHTO T 250, Section 8; Titanium Dioxide Determination
    Striping Paints (Traffic Marking)
  • Titanium Dioxide Content |  ASTM D 4764; Test Method for Determination by X-Ray Fluorescence of TiO2 Content
    Striping Paints (Traffic Marking)
  • Torsional Recovery |  CO DOT
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Toughness & Tenacity |  ASTM D 5801; Toughness and Tenacity of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Toughness & Tenacity |  ASTM D 5801; Toughness and Tenacity of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Uncompacted Void Content - Aggregates |  ASTM C 1252; Test Method for Uncompacted Void Content of Fine Aggregate (as influenced by Particle Shape, Surface Texture and Grading)
    Mix Designs  | Hot Mix Asphalt Designs
  • Uniformity |  ASTM D 2939, Section 5; Uniformity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Uniformity |  ASTM D 2939, Section 5; Uniformity
    Rejuvenators and Sealers  | Liquid Sealers
  • Uniformity |  ASTM D 6511, Section 5; Test Method for Solvent Bearing Bituminous Compounds, Uniformity
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Unit Weight |  AASHTO T 19; Bulk Density (Unit Weight) and Voids in Aggregate
    Aggregates and Soils
  • Unit Weight |  AASHTO T 228; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Unit Weight |  ASTM C 29 (29M); Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
    Aggregates and Soils
  • Unit Weight |  ASTM D 70; Density of Semi-Solid Bituminous Materials (pycnometer method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Unit Weight & Voids - Aggregates |  ASTM C 29 (29M); Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
    Mix Designs  | Cold Mixes
  • Unit Weight & Voids - Aggregates |  ASTM C 29 (29M); Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Unit Weight & Voids - Aggregates |  ASTM C 29 (29M); Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
    Mix Designs  | Hot Mix Asphalt Designs
  • Vacuum Distillation (Cut Points) |  ASTM D 1160; Distillation of Petroleum Products at Reduced Pressure
    Crude Oil Analysis & Evaluations
  • Viscosity |  ASTM D 1200; Test Method for Viscosity by Furol Viscosity Cup
    Recycling Agents and Additives
  • Viscosity |  ASTM D 1200; Test Method for Viscosity by Furol Viscosity Cup
    Release Agents (for Truck Beds, Tools and Other)
  • Viscosity |  ASTM D 1200; Test Method for Viscosity by Furol Viscosity Cup
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Viscosity |  ASTM D 1200; Test Method for Viscosity by Furol Viscosity Cup
    Rejuvenators and Sealers  | Liquid Sealers
  • Viscosity |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Cutback Asphalts and Products
  • Viscosity - Asphalt Binders |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Cutback Asphalts and Products
  • Viscosity - Asphalt Binders |  ASTM D 1084; Test Method for Viscosity of Adhesives
    Cutback Asphalts and Products
  • Viscosity - Asphalt Binders |  ASTM D 1200; Test Method for Viscosity by Furol Viscosity Cup
    Cutback Asphalts and Products
  • Viscosity - Asphalt Binders |  ASTM D 3794; Guide for Testing Coil Coatings
    Cutback Asphalts and Products
  • Viscosity - Asphalt Binders |  ASTM D 445; Kinematic Viscosity of Transparent and Opaque Liquids (and calculation of dynamic viscosity)
    Crude Oil Analysis & Evaluations
  • Viscosity - Modified Asphalt Binders |  ASTM D 3381; ASTM D 3381 + Toughness & Tenacity, Spot Test & Others
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Viscosity, Absolute |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Binders: Conventional Properties
  • Viscosity, Absolute |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Recycling Agents and Additives
  • Viscosity, Absolute |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Viscosity, Absolute |  ASTM D 2171; Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Binders: Conventional Properties
  • Viscosity, Absolute |  ASTM D 2171; Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Viscosity, Absolute / Dynamic |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Binders: Modified & Special
  • Viscosity, Absolute / Dynamic |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Absolute / Dynamic |  ASTM D 2171; Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Absolute / Dynamic |  ASTM D 2171; Viscosity of Asphalts by Vacuum Capillary Viscometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Absolute / Dynamic |  EN 12596; Viscosity of Asphalt by Capillary Viscometer
    Asphalt Binders: Modified & Special
  • Viscosity, Absolute / Dynamic |  EN 12596; Viscosity of Asphalt by Capillary Viscometer
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Absolute / Dynamic |  EN 12596; Viscosity of Asphalt by Capillary Viscometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Kinematic |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Conventional Properties
  • Viscosity, Kinematic |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Modified & Special
  • Viscosity, Kinematic |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Kinematic |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Kinematic |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Recycling Agents and Additives
  • Viscosity, Kinematic |  AASHTO T 201; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Viscosity, Kinematic |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Modified & Special
  • Viscosity, Kinematic |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Kinematic |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Viscosity, Kinematic |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Conventional Properties
  • Viscosity, Kinematic |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Kinematic |  ASTM D 2170; Test Method for Kinematic Viscosity of Asphalts
    Recycling Agents and Additives
  • Viscosity, Kinematic |  EN 12595; Kinematic Viscosity of Asphalts
    Asphalt Binders: Modified & Special
  • Viscosity, Kinematic |  EN 12595; Kinematic Viscosity of Asphalts
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Kinematic |  EN 12595; Kinematic Viscosity of Asphalts
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Kinematic |  EN 12595; Kinematic Viscosity of Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Viscosity, Rotational |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalt Binders: Conventional Properties
  • Viscosity, Rotational |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalt Binders: Modified & Special
  • Viscosity, Rotational |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Rotational |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Rotational |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Viscosity, Rotational |  ASTM D 2196 (Modified); Rheological Properties of Non-Newtonian Material by Rotational (Brookfield type) Viscometer
    Asphalt Binders: Modified & Special
  • Viscosity, Rotational |  ASTM D 2196 (Modified); Rheological Properties of Non-Newtonian Material by Rotational (Brookfield type) Viscometer
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Rotational |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Asphalt Binders: Conventional Properties
  • Viscosity, Rotational |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Asphalt Binders: Modified & Special
  • Viscosity, Rotational |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Asphalt Binders: Penetration and Viscosity - Graded
  • Viscosity, Rotational |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Viscosity, Rotational |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Viscosity, Rotational |  ASTM D 7226; Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Viscosity, Rotational |  ASTM D 7226; Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
    Rejuvenators and Sealers  | Liquid Sealers
  • Viscosity, Rotational of GTR Binder |  FL DOT FM 5-548; Viscosity of asphalt Rubber by Rotational (Dip-n-Read) Viscometer
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Viscosity, Saybolt |  AASHTO T 59, Section 9; Saybolt Viscosity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Viscosity, Saybolt |  AASHTO T 72; Test Method for Saybolt Furol Viscosity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Viscosity, Saybolt |  ASTM D 88; Saybolt Furol Viscosity of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Viscosity, Saybolt Furol |  AASHTO T 72; Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
    Asphalt Binders: Conventional Properties
  • Viscosity, Saybolt Furol |  ASTM D 88; Saybolt Furol Viscosity of Bituminous Materials
    Asphalt Binders: Conventional Properties
  • Viscosity, Saybolt Furol |  ASTM D 88; Saybolt Furol Viscosity of Bituminous Materials
    Coal Tar Pitch
  • Viscosity, Specific (Engler) |  ASTM D 1665; Test Method for Engler Specific Viscosity of Tar Products
    Coal Tar Pitch
  • Viscosity, Stormer |  ASTM D 562; Consistency of Paints Measuring Krebs Units Viscosity Using a Stormer-Type Viscometer
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Viscosity, Stormer |  ASTM D 562; Consistency of Paints Measuring Krebs Units Viscosity Using a Stormer-Type Viscometer
    Rejuvenators and Sealers  | Liquid Sealers
  • Voids in Filler |  BS 812
    Aggregates and Soils
  • Voids in Fine Aggregate |  AASHTO T 304; Test Method for Uncompacted Void Content of Fine Aggregates (Fine Aggregate Angularity)
    Aggregates and Soils
  • Volatile Content |  ASTM D 2369; Test Methods for Volatile Content of Coatings
    Striping Paints (Traffic Marking)
  • Volatile Distillation - Mixtures |  ASTM D 6627; Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
    Mix Designs  | Cold Mixes
  • Volatile Organic Content (VOC) |  ASTM D 6511, Section 20; Test Method for Solvent Bearing Bituminous Compounds, Ash Content (EPA 24A- using ASTM D 2369, D 4017, D 1475)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Volatiles |  ASTM D 2939, Section 9; Volatiles
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Volatiles |  ASTM D 2939, Section 9; Volatiles
    Rejuvenators and Sealers  | Liquid Sealers
  • Volatiles |  EPA 1311/8260; Test Method for Determining TCLP Volatiles
    Asphalts: Chemical Analysis
  • Volatiles |  EPA 1311/8260; Test Method for Determining TCLP Volatiles
    Asphalts: Environmental Analysis
  • Volumetric Properties |  AI SP-2; Superpave Mix Design, No. 2
    Pavement Performance Property Tests and Evaluations
  • Water Absorption |  ASTM D 545, Section 7.6; Water Absorption; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Conventional Properties
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Modified & Special
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Penetration and Viscosity - Graded
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Coal Tar Pitch
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Cutback Asphalts and Products
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Water Content |  AASHTO T 55; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Rejuvenators and Sealers  | Liquid Sealers
  • Water Content |  ASTM D 4377; Water in Crude Oils by Potentionmetirc Karl Fischer Titration
    Crude Oil Analysis & Evaluations
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Conventional Properties
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Penetration and Viscosity - Graded
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Coal Tar Pitch
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Cutback Asphalts and Products
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Water Content |  ASTM D 95; Test Method for Water in petroleum Products and Bituminous Materials by Distillation
    Rejuvenators and Sealers  | Liquid Sealers
  • Water Resistance |  ASTM D 1735; Practice for Testing Water Resistance of Coating Using Water fog Apparatus
    Striping Paints (Traffic Marking)
  • Water Resistance |  ASTM D 2247; Practice for Testing Water Resistance of Coatings in 100% RH
    Striping Paints (Traffic Marking)
  • Wax Content |  UOP 46; TM for Paraffin Wax Content of Petroleum Oils and Asphalts
    Asphalts: Chemical Analysis
  • Wear Resistance (Dry and/or Wet) |  ASTM D 2486M; Determination of Relative Wear Resistance of Bituminous Pavement Sealers in Both Unconditioned and Conditioned (Water) Environments
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Wear Resistance (Dry and/or Wet) |  PRI TM 035; Determination of Relative Wear Resistance of Bituminous Pavement Sealers in Both Unconditioned and Conditioned (Water) Environments
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Weight per Gallon |  AASHTO T 59, Section 10; Determining Density of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Weight per Gallon |  AASHTO T 59, Section 56-62; Test Method for Determining Density of Asphalt Emulsions
    Release Agents (for Truck Beds, Tools and Other)
  • Weight per Gallon |  AASHTO T 59, Section 56-62; Weight per Gallon of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Weight per Gallon |  ASTM D 2939, Section 7; Weight per Gallon
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Weight per Gallon |  ASTM D 6511, Section 6; Test Method for Solvent Bearing Bituminous Compounds, Weight per Gallon (Cup Method)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Weight per Gallon |  ASTM D 6937; Determining Density of Emulsified Asphalts
    Release Agents (for Truck Beds, Tools and Other)
  • Weight per Gallon |  ASTM D 6937; Determining Density of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Weights and Measures |  ASTM D 3549; Tethod Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
    Pavement Performance Property Tests and Evaluations
  • Wet Film Continuity |  ASTM D 2939, Section 22; Wet Film Continuity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Wet Film Continuity |  ASTM D 2939, Section 22; Wet Film Continuity
    Rejuvenators and Sealers  | Liquid Sealers
  • Wet Flow |  ASTM D 2939, Section 19; Wet Flow
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Wet Flow |  ASTM D 2939, Section 19; Wet Flow
    Rejuvenators and Sealers  | Liquid Sealers
  • Wet Stripping |  ISSA TB 114; Wet Stripping Test for Cured Slurry Seal Mix
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Wet Track Abrasion |  ISSA TB 100; Test Method for Wet Track Abrasion of Slurry Surfaces
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Workability - Mixtures |  ASTM D 6704; Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
    Mix Designs  | Cold Mixes
  • Workability - Mixtures |  MIL-C-1848OB; Test Method for Workability
    Coal Tar Pitch