PRI LOGO

Product Group Pages Test Methods & Properties Raw Materials
  • Carbon Black Content |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 38-39
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Carbon Black Dispersion |  ASTM D 5596; Test Method for Microscopic Evaluation of Dispersion of Carbon Black in Polyolefin Geosynthetics
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Carbon, Hydrogen, Nitrogen & Oxygen Content |  ASTM D 5291; Instrumental Determination of C, H, N & O in Petroleum Products & Lubricants
    Crude Oil Analysis & Evaluations
  • Carbonyl Index |  ASTM E 1252; General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
    Asphalts: Chemical Analysis
  • Cement Mixing |  AASHTO T 59, Section 12; Determining Cement Mixing of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Cement Mixing |  ASTM D 6935; Determining Cement Mixing of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Characterization |  ASTM D 2007; Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum Derived Oils by Clay-Gel Absorption Chromatographic Method
    Recycling Agents and Additives
  • Chemical Resistance - Geogrids |  ASTM D 6213; Practice for Tests to Evaluate Chemical Resistance of Geogrids to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chemical Resistance - Geomembranes |  ASTM D 5747; Practice for Tests to Evaluate Chemical Resistance of Geomembranes to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chemical Resistance - Geonets |  ASTM D 6388; Practice for Tests to Evaluate Chemical Resistance of Geonets to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chemical Resistance - Geotextiles |  ASTM D 6389; Practice for Tests to Evaluate Chemical Resistance of Geotextiles to Liquids
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Chloride Content |  ASTM D 4294 (Modified)
    Asphalts: Chemical Analysis
  • Chloride Ion Penetration Resistance |  AASHTO T 259; Method of Test for Resistance of Concrete to Chloride Ion Penetration
    Concrete
  • Chloride Ion Penetration Resistance |  AASHTO T 277; Method of Test for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
    Concrete
  • Chloride Ion Penetration Resistance |  ASTM C 1202; Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
    Concrete
  • Chlorides (Organic) |  ASTM D 4929; Determination of Organic Chloride Content in Crude Oil
    Crude Oil Analysis & Evaluations
  • Classification Compatibility (Schultze-Breurer & Ruck) |  ISSA TB 144; Test Method for Classification of Aggregate Filler - Bitumen Compatibility by Schultze-Breurer & Ruck Procedures
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Clay Content |  AASHTO T 176; Plastic Fines in Graded Aggregates and Soils by Use of Sand Equivalent Test
    Aggregates and Soils
  • Clay Lumps & Friable particles |  AASHTO T 112; Clay Lumps and Friable Particles in Aggregates
    Aggregates and Soils
  • Clay Lumps & Friable particles |  ASTM C 142; Test Method for Clay Lumps and Friable Particles in Aggregates
    Aggregates and Soils
  • Coarse Aggregate Angularity |  PA DOT 621; Determination of the Percentage of Fractured particles in Coarse Aggregate
    Aggregates and Soils
  • Coating & Stripping - Mixture |  ASTM D 1664; Coating and Stripping of Bitumen - Aggregate Mixtures
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Coating & Water Resistance |  AASHTO T 59, Section 22; Ash Content
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Coating & Water Resistance |  ASTM D 244, Section 22-29; Coating Ability and Water Resistance
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Cohesion (30 & 60 minute) |  ISSA TB 139; Test Method to Classify Emulsified Asphalt / Aggregate Mixture Systems by Modified Cohesive Tester, Measurement of Set and Cure Characteristics
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Color |  AASHTO T 250, Section 7; Reflectance, Color and Yellowness Index
    Striping Paints (Traffic Marking)
  • Color |  ASTM D 4960; Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
    Striping Paints (Traffic Marking)
  • Compatibility |  ASTM D 5976; Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction
    Asphalt Binders: Modified & Special
  • Compatibility |  ASTM D 5976; Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Compatibility |  ISSA TB 149; Test Method for Boiling Compatibility of Slurry Seal Mixes
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Compatibility - Arkansas |  State DOTs QPL 410.06; Release Agents for Use in Dump Beds hauling Hot Mix Asphalt
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Illinois |  State DOTs; Evaluation of Asphalt Release Agents, Procedure para B.
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Indiana |  State DOTs ITM No. 576-01T; Laboratory Evaluation of Anti-Adhesive Agents, para 6.1 Film Test
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Kansas |  State DOTs KTMR-19, Section Subsection 1719; Release Compound for Bituminous Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Louisiana |  State DOTs Asphalt release Agents, Section 2-3; Rub & Retained Marshall Stability
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Mississippi |  State DOTs Release Agents; One-Day Compatibility
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Missouri |  Mo DOT T 63; Determination of Compatibility of Asphalt Release Agents with Hot Asphaltic Concrete
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Ohio |  State DOTs; Detrimental Effects as Defined in Laboratory Test Procedure for Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Oklahoma |  State DOTs 441.03; Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Tennessee |  State DOTs QPL 21; Release Compounds for Asphalt Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Texas |  TX DOT Tex-239-F; Asphalt Release Agent, Chapter 35
    Release Agents (for Truck Beds, Tools and Other)
  • Compatibility - Virginia |  VA DOT TM 53; Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Composition (Design Method) - Marshall Method |  AI MS-2; Preparation of Bituminous Specimens by Marshall Apparatus
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Composition (Design Method) - Superpave TM |  AI SP-2; Superpave Mix Design, Level I
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Compression |  ASTM D 575; Test Method for Rubber Properties in Compression
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Rubber Materials
  • Compression, |  ASTM D 545, Section 7.2; Recovery; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Compressive Strength |  AASHTO T 167; Compressive Strength of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Compressive Strength |  ASTM D 1074; Test Method of Compressive Strength of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Compressive Strength – Effects of Water |  AASHTO T 165; Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Compressive Strength – Effects of Water |  ASTM D 1075; Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Cone Penetration, Fuel-Immersed* |  ASTM D 217; Test Method for Cone Penetration of Lubricating Greases
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Cone Penetration, Fuel-Immersed* |  ASTM D 5329, Section 7; Test Method for Cone Penetration of Lubricating Greases, Fuel-Immersed
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Cone Penetration, Non-Immersed* |  ASTM D 217; Test Method for Cone Penetration of Lubricating Greases
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Cone Penetration, Non-Immersed* |  ASTM D 5329, Section 6; Test Method for Cone Penetration of Lubricating Greases, Non-Immersed
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Conradson Carbon Residue (Coking Value) |  ASTM D 189; Conradson Carbon Residue of Petroleum Products
    Crude Oil Analysis & Evaluations
  • Consistency |  ASTM D 562; Consistency of Paints Measuring Krebs Units Viscosity Using a Stormer-Type Viscometer
    Striping Paints (Traffic Marking)
  • Consistency |  ASTM D 6511, Section 11; Test Method for Solvent Bearing Bituminous Compounds, Consistency (ASTM D 562)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Consistency |  ISSA TB 106; Slurry Seal Consistency
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Consistency (Saybolt Furol) |  AASHTO T 59, Section 17; AASHTO T 72; Saybolt Viscosity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Consistency (Saybolt Furol) |  ASTM D 244, Section 17-21; ASTM D 88; Saybolt Viscosity
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Constant Weight |  ASTM D 1037; Test Method for Evaluating the Properties of Wood-Based Fiber and Particle Panel Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Contaminate Fractions |  ASTM D 7213; Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615 °C by Gas Chromatography
    Asphalts: Chemical Analysis
  • Corrosion Evaluation |  ASTM D 1654; Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
    Striping Paints (Traffic Marking)
  • Corrosion Resistance |  ASTM D 5968; Evaluation of Corrosiveness of Diesel Engine Oil
    Asphalt Binders: Conventional Properties
  • Corrosion Resistance (Copper) |  ASTM D 4048; Detection of Copper Corrosion from Lubricating Greases
    Asphalt Binders: Conventional Properties
  • Corrosion Resistance (Copper) |  ASTM D 4048; Detection of Copper Corrosion from Lubricating Greases
    Asphalts: Chemical Analysis
  • Crack Resistance |  ASTM D 5397; Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Cracking Resistance |  AASHTO M 248; Test Method for Cracking Resistance (on concrete block), para 4.3.3
    Striping Paints (Traffic Marking)
  • Cracking Resistance |  ISSA TB 146; Test Method for Flexural Tension Determination of Cracking Resistance of Slurry Mixes at Ambient and 4°C
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Creep Compliance |  AASHTO T 322; Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
    Pavement Performance Property Tests and Evaluations
  • Creep Stiffness |  AASHTO T 313; Determining the Flexural Creep Stiffness of Asphalt Binders Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Ground Tire Rubber Modified
  • Creep Stiffness |  AASHTO T 313; Determining the Flexural Creep Stiffness of Asphalt Binders Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Modified & Special
  • Creep Stiffness |  AASHTO T 313; Determining the Flexural Creep Stiffness of Asphalt Binders Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Creep Stiffness |  ASTM D 6648; Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Ground Tire Rubber Modified
  • Creep Stiffness |  ASTM D 6648; Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Modified & Special
  • Creep Stiffness |  ASTM D 6648; Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Critical Cracking Temperature |  ASTM D 6816; Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
    Asphalt Binders: Modified & Special
  • Crude Blending (Volume Method) |  PRI
    Crude Oil Analysis & Evaluations
  • Crude Oil Compatibility |  ASTM D 6703M; Test Method for Automated Heithaus Titrimetry
    Crude Oil Analysis & Evaluations
  • Crush Resistance |  ASTM D 1213; Test Method for Crushing Resistance
    Striping Paints (Traffic Marking)