PRI LOGO

Product Group Pages Test Methods & Properties Raw Materials
  • FAA |  FAA AC 150/5370-10C; Test Method for Fuel Resistance
    Rejuvenators and Sealers  | Liquid Sealers
  • Fatigue Life |  AASHTO T 321; Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
    Pavement Performance Property Tests and Evaluations
  • Fiber & Other Content |  AZ DOT TM 714
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Fiber Type Identification |  ASTM D 276; Test Method for Identification of Fibers in Textiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Field (Aggregate) Coating Test |  AASHTO T 59, Section 43-48; Field Coating Test of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Field (Aggregate) Coating Test |  ASTM D 244, Section 52-57; Field Coat Testing on Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Filtering Efficiency |  ASTM D 5141; Test Method for Determining Filtering Efficiency and Flow Rate for Silt Fence Application of a Geotextile Using Site Specific Soils
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Fine Aggregate Angularity - Aggregates |  AASHTO T 304; Test Method for Uncompacted Void Content of Fine Aggregates (Fine Aggregate Angularity)
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Fine Aggregate Angularity - Aggregates |  AASHTO TP 33; Test Method for Uncompacted Void Content of Fine Aggregate
    Aggregates and Soils
  • Flammability |  ASTM D 6668; Test Method for Discrimination Between Flammability Ratings F=0 and F=1
    Release Agents (for Truck Beds, Tools and Other)
  • Flash and Fire Points |  AASHTO T 48; Test Method for Flash and Fire Points by Cleveland Open Cup
    Striping Paints (Traffic Marking)
  • Flash Point |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Recycling Agents and Additives
  • Flash Point |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Recycling Agents and Additives
  • Flash Point |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Striping Paints (Traffic Marking)
  • Flash Point |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Crude Oil Analysis & Evaluations
  • Flash Point |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Flash Point |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Rejuvenators and Sealers  | Liquid Sealers
  • Flash Point (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Cutback Asphalts and Products
  • Flash Point (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Cutback Asphalts and Products
  • Flash Point (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Cleveland Open Cup |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Conventional Properties
  • Flash Point, Cleveland Open Cup |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Conventional Properties
  • Flash Point, Cleveland Open Cup |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Conventional Properties
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Modified & Special
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Coal Tar Pitch
  • Flash Point, Cleveland Open Cup (COC) |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Modified & Special
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Coal Tar Pitch
  • Flash Point, Cleveland Open Cup (COC) |  ASTM D 92; Flash and Fire Points by Cleveland Open Cup
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Modified & Special
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Coal Tar Pitch
  • Flash Point, Cleveland Open Cup (COC) |  EN 22592 (b); Flash and Fire Points by Cleveland Open Cup
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flash Point, Cleveland Open Cup (COC) |  GOST 4333; Flash and Fire Points by Cleveland Open Cup
    Asphalt Binders: Penetration and Viscosity - Graded
  • Flash Point, Pensky-Martens |  AASHTO T 48; Flash and Fire Points by Cleveland Open Cup Tester
    Asphalt Binders: Ground Tire Rubber Modified
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Conventional Properties
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Ground Tire Rubber Modified
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Modified & Special
  • Flash Point, Pensky-Martens |  ASTM D 93; Flash Point by Pensky-Martens Closed Cup Tester
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flash Point, Tag Open Cup |  AASHTO T 79; Flash Point with Tag Open Cup Apparatus for Use with Materials Having a Flash Less Than 93.3C (Cutback)
    Asphalt Binders: Conventional Properties
  • Flash Point, Tag Open Cup |  ASTM D 3143; Flash Point of Cutback Asphalt with Tag Open Cup Apparatus
    Asphalt Binders: Conventional Properties
  • Flash Point, Tag Open Cup |  ASTM D 3143; Flash Point of Cutback Asphalt with Tag Open Cup Apparatus
    Cutback Asphalts and Products
  • Flat & Elongated Particles - Aggregates |  ASTM D 4791; Test Method for Flat Particles, Elongated Particles or Flat & Elongated particles in Coarse Aggregates
    Aggregates and Soils
  • Flat & Elongated Particles - Aggregates |  ASTM D 4791; Test Method for Flat Particles, Elongated Particles or Flat & Elongated particles in Coarse Aggregates
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Flat & Elongated Particles - Aggregates |  ASTM D 4791; Test Method for Flat Particles, Elongated Particles or Flat & Elongated particles in Coarse Aggregates
    Mix Designs  | Hot Mix Asphalt Designs
  • Flexibility |  ASTM D 2939, Section 16; Flexibility
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Flexibility |  ASTM D 2939, Section 16; Flexibility
    Rejuvenators and Sealers  | Liquid Sealers
  • Flexibility |  ASTM D 3111; Test Method for Flexibility of Hot-Melt Adhesive by Mandrel Bend Test Method
    Flexible Pavement Marker Adhesive
  • Flexibility (low temperature) |  ASTM D 3111; Test Method for Flexibility of Hot-Melt Adhesive by Mandrel Bend Test Method
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Flexibility* |  ASTM D 5329, Section 18; Flexibility
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Float |  ASTM D 139; Float Test for Bituminous Materials
    Coal Tar Pitch
  • Float Test |  ASTM D 139; Float Test for Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Flow* |  ASTM D 5329, Section 8; Flow
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Flowability |  AASHTO T 250, Section 9; Test Method for Flowability
    Striping Paints (Traffic Marking)
  • Fluorescence Microscopy |  PRI
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Fluorescence Microscopy |  Shell Chemical
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Flux / Resid |  Laboratory distillation capability provides an array of methods to characterize crude for efficacy in roofing
    Asphalts: Roofing (BUR's, Oxidized (Shingle Coatings), Modified Bitumens (MB's), Others)
  • Force Ductility |  State DOTs; Refer to State DOT Binder Specification
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Force Ductility & Ratio |  AASHTO T 300; Force Ductility Test of Bituminous Materials
    Asphalt Binders: Modified & Special
  • Force Ductility (Ratio) |  AASHTO T 300; Force Ductility Test of Bituminous Materials
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Force Ratio |  AASHTO T 300; Force Ductility Test of Bituminous Materials
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Fraass Breaking Point |  DIN 52012; Temperature Below Which a Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Conventional Properties
  • Fraass Breaking Point |  EN 12593; Temperature Below Which a Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Penetration and Viscosity - Graded
  • Fraass Breaking Point |  EN 12593; Temperature Below Which Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Modified & Special
  • Fraass Breaking Point |  EN 12593; Temperature Below Which Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Fraass Breaking Point |  GOST 11507; Temperature Below Which a Bitumen Tends to Break Rather than Flow Under Some Mechanical Constraints
    Asphalt Binders: Penetration and Viscosity - Graded
  • Fractured Faces - Aggregates |  ASTM D 5821; Test Method for Determining Percentage of Fractured particles in Coarse Aggregate
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Fractured Faces - Aggregates |  ASTM D 5821; Test Method for Determining Percentage of Fractured particles in Coarse Aggregate
    Mix Designs  | Hot Mix Asphalt Designs
  • Fractured Particles |  ASTM D 5821; Test Method for Determining Percentage of Fractured particles in Coarse Aggregate
    Aggregates and Soils
  • Freeze-Thaw Conditioning (Crack Resistance) |  FAA EB 46A; Determining Crack Development When Exposed to Cycles of Freezing and Thawing
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Freezing |  AASHTO T 59, Section 16; Test Method for Determining Damage from Freezing
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Fuel Resistance |  FAA EB 46A; Determining Resistance to Kerosene
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Fuel Resistance |  FAA P 631; Fuel Resistance
    Rejuvenators and Sealers
No results for the selected filter.