PRI LOGO

Product Group Pages Test Methods & Properties Raw Materials
  • Marshall Stability & Flow |  AASHTO T 245; Resistance to Plastic Flow of Bituminous Mixtures using Marshall Apparatus
    Pavement Performance Property Tests and Evaluations
  • Marshall Stability & Flow |  AI MS-2; Preparation of Bituminous Specimens by Marshall Apparatus
    Pavement Performance Property Tests and Evaluations
  • Mass |  ASTM D 5261; Test Method for Measuring Mass per Unit Area of Geotextiles
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Mechanical Analysis of Extracted Aggregates |  AASHTO T 30; Mechanical Analysis of Extracted Aggregates (requires extraction by AASHTO T 164 / ASTM D 2172 Quantitative Extraction of Bitumen…)
    Pavement Performance Property Tests and Evaluations
  • Melt Flow Rate |  ASTM D 1238; Melt Flow Rate of Thermoplastics by Extrusion Plastometer
    Special Services: Product Development & Improvement, Additive & Modifier Characterizations
  • Melting |  ASTM D 5167, Section 15; Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation Required for Individual and/or Specification Tests noted by *
    Flexible Pavement Marker Adhesive
  • Metal Contamination |  FL DOT FM 5-559, Section 5; Ground Tire Rubber
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Metals & Metals Sample Preparation |  ASTM D 5708; Determination of Nickel, Vanadium and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectroscopy
    Crude Oil Analysis & Evaluations
  • Metals (8 RCRA metals) |  EPA 1311/6010; Test Method for Determining 8 RCRA TCLP Metals
    Asphalts: Chemical Analysis
  • Metals (Ni, Va, Fe) |  ASTM D 5708; Determination of Nickel, Vanadium and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectroscopy
    Asphalts: Chemical Analysis
  • Micro-Deval |  AASHTO T 327; Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
    Aggregates and Soils
  • Mineral Matter |  ASTM D 6511, Section 19; Test Method for Solvent Bearing Bituminous Compounds, Mineral Matter (ASTM D 4)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Mineral Stabilizers and Bitumen |  ASTM D 6511, Section 18; Test Method for Solvent Bearing Bituminous Compounds, Mineral Stabilizers (ASTM D 4)
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Miscibility with Water |  AASHTO T 59, Section 15; Miscibility of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Miscibility with Water |  ASTM D 6999; Miscibility of Emulsified Asphalts
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Mix Time |  ISSA TB 113; Mix Time
    Mix Designs  | Micro-Surfacing and Slurry Seal
  • Moisture (Effect of) - Hot Mix / Paving Mixtures |  ASTM D 4867 (4867M); Test Method for Determining Effect of Moisture on Asphalt Concrete Paving Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Moisture - Aggregates |  ASTM C 566; Test Method for Total Moisture Content of Aggregate by Drying
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Moisture - Aggregates |  ASTM D 1864; Moisture in Mineral Aggregate Used on Built-Up-Roofs
    Asphalt Binders: Modified & Special
  • Moisture - Aggregates |  ASTM D 1864; Moisture in Mineral Aggregate Used on Built-Up-Roofs
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Moisture Content |  AASHTO T 265; Laboratory Determination of Moisture Content of Soils
    Aggregates and Soils
  • Moisture Content |  AASHTO T 329; Moisture Content of Hot-Mix (HMA) by Oven Method
    Pavement Performance Property Tests and Evaluations
  • Moisture Content |  ASTM C 566; Test Method for Total Moisture Content of Aggregate by Drying
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Moisture Content |  ASTM D 2216; Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
    Aggregates and Soils
  • Moisture Content |  FL DOT FM 5-559, Section 4; Ground Tire Rubber
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Moisture or Volatile Content |  AASHTO T 110; Moisture of Volatile Distillates in Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Moisture or Volatile Content |  ASTM D 1461; Moisture of Volatile Distillates in Bituminous Paving Mixtures
    Pavement Performance Property Tests and Evaluations
  • Moisture or Volatile Distillates - Mixture |  ASTM D 1461; Moisture of Volatile Distillates in Bituminous Paving Mixtures
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Moisture Resistance - Hot Mix / Paving Mixtures |  AASHTO T 283; Test Method for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage
    Mix Designs  | Hot Mix Asphalt Designs
  • Moisture Resistance - Hot Mix / Paving Mixtures |  ASTM D 1075; Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    Mix Designs  | Hot Mix Asphalt Designs
  • Multiple Stress Creep & Recovery |  AASHTO TP 70-07; Multiple Stress Creep Recovery Test of Asphalt Binders using A Dynamic Shear Rheometer (MSCR)
    Asphalt Binders: Modified & Special
  • Multiple Stress Creep & Recovery |  AASHTO TP 70-07; Multiple Stress Creep Recovery Test of Asphalt Binders using A Dynamic Shear Rheometer (MSCR)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
No results for the selected filter.