PRI LOGO

Product Group Pages Test Methods & Properties Raw Materials
  • RAP (recovered binder viscosity) |  AASHTO T 202; Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Pavement Performance Property Tests and Evaluations
  • RAP (recovered binder viscosity) |  ASTM D 2171; Viscosity of Asphalts by Vacuum Capillary Viscometer
    Pavement Performance Property Tests and Evaluations
  • RAP (Recovery) |  AASHTO T 170; Recovery of Asphalt from Solution by Abson Recovery
    Pavement Performance Property Tests and Evaluations
  • RAP (Recovery) |  ASTM D 1856; Recovery of Asphalt from Solution by Abson Recovery
    Pavement Performance Property Tests and Evaluations
  • RAP or Millings Recovered Binder Viscosity |  AASHTO T 164; Extraction + ASTM D 5404; Recovery + ASTM D 2171; Absolute Viscosity
    Aggregates and Soils
  • RAP or Millings Recovered Binder Viscosity |  ASTM D 2172; Extraction + ASTM D 5404; Recovery + ASTM D 2171; Absolute Viscosity
    Aggregates and Soils
  • Raveling - Mixtures |  ASTM D 7196; Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
    Mix Designs  | Cold Mixes
  • RCRA Metals |  EPA 1311/6010; Test Method for Determining 8 RCRA TCLP Metals
    Asphalts: Environmental Analysis
  • Recovery |  ASTM D 545, Section 7.2; Recovery; Test Methods for Preformed Expansion Joint Fillers for Concrete Construction
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Preformed Expansion Joint Fillers for Concrete Construction
  • Redispersibility |  ASTM D 4866, Section 6.1; Test Method for Redispersibility; Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations
    Rejuvenators and Sealers  | Liquid Sealers
  • Reflectance |  AASHTO T 250, Section 7; Reflectance, Color and Yellowness Index
    Striping Paints (Traffic Marking)
  • Reflectance |  ASTM E 1349; Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
    Striping Paints (Traffic Marking)
  • Reflectance of Aluminum Coatings |  ASTM D 6511, Section 15; Test Method for Solvent Bearing Bituminous Compounds, Reflectance
    Cutback Asphalts and Products  | ASTM D 6511; Solvent Bearing Bituminous Compounds
  • Reflective Crack Resistance (Beam on Elastic Foundation) |  PRI TM 036; Test Method to Determine Resistance to Reflective Crack Formation Using Asphalt Pavement Analyzer
    Pavement Performance Property Tests and Evaluations
  • Reflective Crack Resistance (Beam on Elastic Foundation) |  PRI TM 037; Test Method for Determination of Fabric Interlays to Reflective Crack Formation in HMA Specimens Subjected to Cycle Loading
    Pavement Performance Property Tests and Evaluations
  • Reflective Crack Resistance – Beam of Elastic Foundation |  PRI TM 037; Test Method for Determination of Fabric Interlays to Reflective Crack Formation in HMA Specimens Subjected to Cycle Loading
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Reflective Crack Resistance – APA Method |  PRI TM 036; Test Method to Determine Resistance to Reflective Crack Formation Using Asphalt Pavement Analyzer
    Geotextiles, Geogrids, Geomembranes, Geonets, Geosynthetics
  • Release Capability - Arkansas |  State DOTs QPL 410.06; Release Compound for Bituminous Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Indiana |  State DOTs ITM No. 576-01T, Section para 6.2; Laboratory Evaluation of Anti-Adhesive Agents, Mixture Test
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Kansas |  State DOTs KTMR-19; Method of Testing Release Compounds for Bituminous Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Kentucky |  State DOTs KM 64-422-03; Asphalt Release Agent
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Mississippi |  State DOTs Release Agents ; Slide Test
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Ohio |  State DOTs; As Defined in Laboratory Test Procedure for Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Oklahoma |  State DOTs 441.03; Asphalt Release Agents
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Tennessee |  State DOTs QPL 21; Release Compounds for Asphalt Mixes
    Release Agents (for Truck Beds, Tools and Other)
  • Release Capability - Texas |  TX DOT Tex-239-F; Asphalt Release Agent, Mixture Slide Test, Asphalt Performance Test
    Release Agents (for Truck Beds, Tools and Other)
  • Repeated Shear |  AASHTO T 320; Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
    Pavement Performance Property Tests and Evaluations
  • Residue by Evaporation |  AASHTO T 59, Section 7; Residue by Evaporation of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue by Evaporation |  ASTM D 2939, Section 8; Residue by Evaporation
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue by Evaporation |  ASTM D 2939, Section 8; Residue by Evaporation
    Rejuvenators and Sealers  | Liquid Sealers
  • Residue by Evaporation |  ASTM D 6934; Residue by Evaporation of Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue by Evaporation |  CALTRANS 331; Method of Test for Residue by Evaporation of Latex Modified Emulsified Asphalt
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Residue Penetration |  ASTM D 243; Residue of Specified Penetration
    Cutback Asphalts and Products
  • Resilience |  ASTM D 5329; Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    Asphalt Binders: Ground Tire Rubber Modified
  • Resilience |  ASTM D 5329; Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    Asphalt Binders: Modified & Special
  • Resilience |  ASTM D 5329; Test Methods for Sealants and Fillers, Hot Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Resilience* |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilience* |  ASTM D 5329, Section 12; Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilience, Oven-Aged* |  ASTM D 5; Test Method for Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilience, Oven-Aged* |  ASTM D 5329, Section 13; Penetration of Bituminous Materials
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Resilient Modulus |  ASTM D 4123; Indirect Tension Test for resilient Modulus of Bituminous Mixtures
    Pavement Performance Property Tests and Evaluations
  • Resistance to Alkali |  MIL-C-1848OB; Test Method for Resistance to Alkali, para 4.3.1.6
    Coal Tar Pitch
  • Resistance to Freezing |  AASHTO T 161; Method of Test for Resistance of Concrete to Rapid Freezing and Thawing
    Concrete
  • Resistance to Freezing |  ASTM D 2939, Section 6; Resistance to Freezing
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Liquid Emulsions
  • Resistance to Freezing |  ASTM D 2939, Section 6; Resistance to Freezing
    Rejuvenators and Sealers  | Liquid Sealers
  • Resistance to Hardening |  EN 12607-1 or -3
    Asphalt Binders: Penetration and Viscosity - Graded
  • Resistance to Heat |  ASTM D 2939, Section 14; Resistance to Heat
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Heat |  ASTM D 2939, Section 14; Test Method for Resistance to Heat at 80°C
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Impact |  ASTM D 2939, Section 26; Resistance to Impact
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Impact |  ASTM D 2939, Section 26; Resistance to Impact
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Impact |  MIL-C-1848OB; Test Method for Resistance to Impact, para 4.3.1.5
    Coal Tar Pitch
  • Resistance to Impact after Accelerated Weathering |  ASTM D 2939, Section 27; Resistance to Impact After Accelerated Weathering
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Impact after Accelerated Weathering |  ASTM D 2939, Section 27; Resistance to Impact After Accelerated Weathering
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Kerosene |  ASTM D 2939, Section 25; Resistance to Kerosene
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Kerosene |  ASTM D 2939, Section 25; Resistance to Kerosine
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Kerosene |  ASTM D 4866, Section 6.4; Resistance to Kerosene (ASTM D 4866 (legacy), Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Plastic Flow - Mixture |  AASHTO T 245; Resistance to Plastic Flow of Bituminous Mixtures using Marshall Apparatus
    Mix Designs  | FAA Engineering Brief No. 59, Item P 401
  • Resistance to Volatilization |  ASTM D 2939, Section 23; Resistance to Volatization
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Volatilization |  ASTM D 2939, Section 23; Resistance to Volatization
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Resistance to Water |  ASTM D 2939, Section 15; Resistance to Water
    Rejuvenators and Sealers  | Cured Sealer Films or Residues from Distillation or Evaporation
  • Resistance to Water |  ASTM D 2939, Section 15; Resistance to Water
    Asphalt Emulsions: Anionic, Cationic, Polymer Modified, Mineral Colloid and Others  | Residues from Distillation or Evaporation
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Conventional Properties
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Modified & Special
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Rolling Thin Film Oven Test (RTFOT) |  AASHTO T 240; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Recycling Agents and Additives
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Conventional Properties
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Ground Tire Rubber Modified
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Modified & Special
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Penetration and Viscosity - Graded
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Asphalt Binders: Superpave™ Performance Graded (Standard & Modified)
  • Rolling Thin Film Oven Test (RTFOT) |  ASTM D 2872; Test Method for Effect of Heat and Air on a Moving Film of Asphalt (RTFOT Method)
    Recycling Agents and Additives
  • Rotational (Brookfield) Viscosity |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Asphalt Binders: Ground Tire Rubber Modified
  • Rotational (Brookfield) Viscosity |  AASHTO T 316; Viscosity Determination of Asphalt Binders using Rotational Viscometer
    Flexible Pavement Marker Adhesive
  • Rotational (Brookfield) Viscosity |  ASTM D 2196 (Modified); Rheological Properties of Non-Newtonian Material by Rotational (Brookfield type) Viscometer
    Asphalt Binders: Ground Tire Rubber Modified
  • Rotational (Brookfield) Viscosity |  ASTM D 4402; Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
    Flexible Pavement Marker Adhesive
  • Rotational (Brookfield) Viscosity |  ASTM D 5801; Toughness and Tenacity of Bituminous Materials
    Asphalt Binders: Ground Tire Rubber Modified
  • Roundness |  ASTM D 1155; Test Method for Roundness of Glass Spheres
    Striping Paints (Traffic Marking)
  • Rubber Content |  TX DOT Tex 544-C; Rubber Content for Rubber-Asphalt Crack Sealant
    Crack and Joint Sealants (Hot or Cold Applied and Preformed)  | For Hot-Applied Asphalt Based Materials Specs
  • Rubber Hydrocarbon Content |  ASTM D 297; Test Method for Rubber Products Chemical Analysis, para 24
    Ground Tire (Crumb) Rubber for Use in Asphalt Binders
  • Rusting |  ASTM D 610; Test Method for Evaluating Degree of Rusting on Painted Steel Surface
    Striping Paints (Traffic Marking)
  • Rutting Resistance |  AASHTO TP 63; Determining Rutting Susceptibility of Asphalt Paving Mixtures Using the Asphalt Pavement Analyzer (APA)
    Pavement Performance Property Tests and Evaluations